Care and cleaning of the refrigerator.
Replacing the Light Bulb
Moving the control beyond the MIN position does not remove power to the light circuit.
The bulb is located behind the shield in the back wall.
Unplug the refrigerator.
Remove shelves.
Remove the screw.
Gently remove the light shield by inserting a flat blade screwdriver into the slot at the top of the shield and pop it off.
Replace the bulb with an appliance bulb of the same or lower wattage (15 Watt maximum).
Insert the tab at the bottom of the light shield into the light bulb housing and snap it into place.
Replace the screw.
Operating Instructions Safety Instructions
Installation | Instructions |
Consumer Support Troubleshooting Tips
Preparing for Vacation
For long vacations or absences, remove food and unplug the refrigerator. Move the control beyond the MIN position, and clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 liter) of water. Leave the doors open.
Preparing to Move
Secure all loose items such as shelves and | Be sure the refrigerator stays in an upright |
drawers by taping them securely in place | position during moving. |
to prevent damage. |
|
6