GE GTR12 Installation Instructions REVERSING THE DOOR SWING, Important Notes, Tools You Will Need

Installation Instructions

REVERSING THE DOOR SWING

IMPORTANT NOTES

When reversing the door swing:

•Read the instructions all the way through before starting.

•Handle parts carefully to avoid scratching paint.

•Set screws down by their related parts to avoid using them in the wrong places.

•Provide a non-scratching work surface for the doors.

IMPORTANT: Once you begin, do not move the cabinet until door-swing reversal is completed.

These instructions are for changing the hinges from the right side to the left side—if you ever want to change the hinges back to the right side, follow these same instructions and reverse all references to left and right.

Unplug the refrigerator from its electrical outlet.

Empty all door shelves.

TOOLS YOU WILL NEED

1

REMOVE THE FREEZER DOOR

Remove the hinge cover, screws (some models have lock washers with each screw), top hinge and shim (if included).

Set the door on a non-scratching surface with the outside up.

NOTE: On some models, when removing the door, watch for washer(s) between the center hinge and the bottom of the freezer door that may stick to the door. Do not lose.

CAUTION: Do not let door drop

to the floor. To do so could damage the door stop.

5/16” Socket driver Thin-blade screwdriver

Phillips screwdriver Masking tape

8