Before you call for service…

Troubleshooting Tips

Save time and money! Review the chart below first and you may not need to call for service.

Problem

Possible Causes

What To Do

Water contains tiny

New filter canister contains

black particles

activated carbon, which is a

 

harmless black powder.

Turn on the filtered water faucet and allow these harmless carbon particles to purge from the canister. Turn off the faucet when the water is clear.

Water has air bubbles

Air in system after installation.

Will go away after water runs for a while.

and is cloudy

 

 

 

 

 

Indicator light on the

Six months usage has occurred.

Replace both filter canister and battery in the faucet base.

faucet base is flashing

This is the maximum life of

 

 

the filter canister.

 

 

 

 

Indicator light on the

Normal operation.

Does not blink until 6 months of operation has passed.

faucet base is not blinking

 

 

 

Battery may need to be replaced.

Normally the light is not on. The light blinks every 30 seconds to

 

 

indicate a filter change is needed. This occurs about every 6 months.

 

 

• Replace battery. Indicator light will blink rapidly 5 times to indicate

 

 

proper installation and operation.

Indicator light on the faucet base is not working when new battery is installed

Battery may need to be replaced or it may have been installed incorrectly.

Observe orientation markings on the holder and install correctly. Replace battery if it is old.

Chlorine taste and/or

The filter canister is no

Replace the filter canister.

odor in the product water

longer removing chlorine

 

 

from the water supply.

 

Water dispenses

The filter has been installed

very slowly

for too long.

A six-month change-out period is recommended. Replace the filter canister.

The filter canister has

High sediment levels can cause premature clogging. Replace the

become clogged.

filter canister.

Fittings are leaking

Tubing may not be installed

 

properly.

Fully follow the installation instructions and be sure the tubing is free of nicks, burrs, etc., and is installed to the proper depth.

No water dispensing

Filter canister not fully installed.

Fully follow the filter replacement instructions.

from system

 

 

13

Page 13
Image 13
GE GX1S50F installation instructions Before you call for service…

GX1S50F specifications

The GE GX1S50F is an advanced water filtration system designed to provide clean and safe drinking water for households. This innovative system utilizes cutting-edge technologies to ensure that contaminants are effectively reduced while enhancing the overall taste and quality of the water.

One of the main features of the GE GX1S50F is its three-stage filtration process. The system first employs a sediment filter that captures large particles such as dirt, sand, and rust, ensuring that these impurities do not reach the subsequent stages. Following this, a carbon block filter takes over, which is adept at removing chlorine, lead, and other harmful chemicals that can affect the water's taste and safety. Finally, the system features a post-carbon filter that polishes the water, providing the finishing touch to ensure that every drop is crystal clear and fresh.

The GE GX1S50F is designed with user convenience in mind. Its compact size makes it easy to install, fitting seamlessly under most sinks without taking up excessive space. The system is also equipped with a simple shut-off valve, which allows users to quickly halt water flow during filter changes, minimizing mess and ensuring a straightforward replacement process.

Another significant characteristic of the GE GX1S50F is its durability and longevity. The filters are engineered to last up to six months, depending on usage and water quality, allowing households to enjoy cleaner water for a prolonged period without frequent replacements. This not only saves time but also adds to the system's cost-effectiveness.

In addition to its performance features, the GE GX1S50F is designed with sustainability in mind. By providing an efficient means of filtering tap water, the system reduces the reliance on single-use plastic water bottles, promoting an eco-friendly approach to water consumption.

Overall, the GE GX1S50F is a state-of-the-art water filtration solution that combines advanced technology with practical design. With its three-stage filtration process, easy installation, long-lasting filters, and commitment to sustainability, it offers an excellent choice for families looking to improve their drinking water quality while being mindful of their environmental impact.