Care and cleaning of the water softener system.

Safety Instructions

 

Push tool into salt

1- 2

bridge to break

 

Breaking a Salt Bridge

Sometimes, a hard crust or salt bridge forms in the salt storage area. It is usually caused by high humidity or the wrong kind of salt. When the salt bridges, an empty space forms between the water and salt. Then salt will not dissolve in the water to make brine.

If the brine tank is full of salt, it is hard to tell if you have a salt bridge. Salt is loose on top, but the bridge is under it. The following is the best way to check for a salt bridge.

Pencil mark

Salt

Salt should be loose all the way to the bottom of the tank. Take a broom handle or like tool, and carefully push it down into the salt, working it up and down. If the tool strikes a hard

Instructions

Broom

Salt

handle

bridge

Water level

object (be sure it’s not the bottom or sides of the tank), it’s most likely a salt bridge. Carefully break the bridge with the tool. Do not pound on the walls of the tank.

If the wrong kind of salt made the bridge, take it out. Then fill the tank with nugget or pellet salt only. In humid areas, it is best to fill with less salt, more often.

Operating

Troubleshooting Tips

Customer Service

Cap

Screen support

O-ring seal

Screen

*Flow plug

Screen

Nozzle &

Venturi

Gasket

*Fill flow plug

Nozzle & Venturi housing

IMPORTANT: Be sure small holes in the gasket are centered directly over the small holes in the nozzle and venturi housing.

*Install with numbered side up, concave side down.

Clean the Nozzle and Venturi Assembly

A clean nozzle and venturi is needed for the water softening system to work properly. This small unit makes the suction to move brine from the salt storage area to the resin tank during regeneration. If it becomes plugged with sand, dirt, etc., the water softening system will not work and you will get hard water.

To get to the nozzle and venturi remove the water softening system top cover. Be sure the water softening system is in service cycle (no water pressure at nozzle and venturi). Then, while holding the nozzle and venturi housing with one hand, remove the cap. Lift out the screen support and screen, then the nozzle and venturi. Wash and rinse the parts in warm water until clean. If needed, use a small brush to remove iron or dirt. Also check and clean the gasket.

NOTE: Some models have a small flow plug located in the nozzle and venturi, and/or a small cone shaped screen in the housing. Be sure to check and clean these parts, if your model is so equipped.

Carefully replace all parts in the correct order. Lightly lubricate the o-ring seal with clean silicone grease and place in position. Install and tighten the cap, by hand only. Do not over-

tighten the cap or housing.

12

Page 12
Image 12
GE GXSF23Z01 Care and cleaning of the water softener system, Breaking a Salt Bridge, Clean the Nozzle and Venturi Assembly

GXSF23Z01, PNSF35B specifications

The GE PNSF35B and GXSF23Z01 are two advanced models of refrigerators manufactured by General Electric, renowned for their innovation and commitment to energy efficiency. These refrigerators incorporate a range of cutting-edge technologies aimed at enhancing food preservation while maintaining a user-friendly interface.

The GE PNSF35B stands out due to its spacious interior and high storage capacity, designed to meet the needs of families and individuals alike. With a counter-depth design, it seamlessly blends into kitchen cabinetry, providing a sleek appearance without sacrificing space. One of the primary features of the PNSF35B is the Advanced Cooling System, which ensures a consistent temperature throughout the refrigerator. This feature is crucial for preserving the freshness of fruits, vegetables, and perishable goods.

Another notable characteristic of the PNSF35B is its smart technology integration. It comes equipped with Wi-Fi connectivity, allowing users to control the appliance remotely through a mobile app. This capability includes temperature adjustments, alerts for door openings, and even a grocery list feature, providing convenience for the modern consumer.

On the other hand, the GXSF23Z01 model is designed with a focus on sustainability and energy efficiency. It features the Energy Star certification, indicating its ability to reduce energy consumption without compromising performance. This model incorporates LED lighting that not only enhances visibility but also consumes less energy compared to traditional lighting solutions.

The GXSF23Z01 also boasts a unique water and ice dispenser, which provides chilled water and ice at the touch of a button. This feature is optimized for ease of use, making it an essential addition to any kitchen. Moreover, the model includes adjustable shelving and a versatile interior layout, allowing users to customize the storage experience to accommodate various food and beverage items.

In conclusion, both the GE PNSF35B and GXSF23Z01 refrigerators encapsulate General Electric's commitment to quality, innovation, and sustainability. With their modern designs, advanced cooling technologies, and user-friendly features, these models are ideal choices for consumers seeking reliable and efficient refrigeration solutions that cater to contemporary lifestyles.