Hitachi W 8VB, W 6VB2 instruction manual Assembly and Operation, Applications, Prior to Operation

English

ASSEMBLY AND OPERATION

APPLICATIONS

◯Tightening hex. head screws

◯Tightening Drywall screws, wood screws and self-drilling screws

NOTE:

For tightening the Self-drilling screws, sub-stopper (B) and non-magnetic bit holder (sold separately) are recommended.

PRIOR TO OPERATION

1.Power source

Ensure that the power source to be utilized conforms to the power source re- quirements specified on the product nameplate.

2.Power switch

Ensure that the switch is in the OFF position. If the plug is connected to a recep- tacle while the switch is in the ON position, the power tool will start operating immediately and can cause serious injury.

3.Extension cord

When the work area is far away from the power source, use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable.

WARNING: Damaged cord must be replaced or repaired.

4.Check the receptacle

If the receptacle only loosely accepts the plug, the receptacle must be repaired. Contact a licensed electrician to make appropriate repairs.

If such a fautly receptacle is used, it may cause overheating, resulting in a seri- ous hazard.

5.Confirming condition of the environment:

Confirm that the work site is placed under appropriate conditions conforming to prescribed precautions.

10