Image Stabilization mode
The Image Stabilization mode combats the effect of hand shake and allows you to take pictures that would otherwise be blurred.
1.Switch the mode dial to ( 
) mode. 2.Press Shutter halfway to focus on the
subject.
3.Press Shutter fully to capture the image.
Setting the Image Stabilization function under
( 
) mode.
(Stabilization during Movie mode is only
available when the Frame Rate is set to 15 fps) 1.Switch the mode dial to ( 
) mode.
2.Press the 
button to enter the Function menu.
3.Use the Left/Right navigation buttons to highlight the Quality function.
4.Use the Up/Down navigation buttons to select 15fps, and press the 
button to confirm your settings.
5.Press the Menu button, and use Up/Down to select the Image Stabilization settings.
6.Use Up/Down to select Off or On.
Then press the 
button to confirm.
36
