GE JBP24 Using the clock and timer, Instructions Safety, Troubleshooting Tips Care and, Cleaning

Models: JBP25 JBP24 JBP27 JBP35

1 32
Download 32 pages 1.22 Kb
Page 10
Image 10
Using the clock and timer.

Instructions

Using the clock and timer.

Not all features are on all models.

Instructions Safety

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a delayed cooking or a delayed self-cleaning cycle.

Touch the CLOCK pad twice.

Touch the + or pads.

If the + or pads are not touched within one minute after you touch the CLOCK pad, the display reverts to the original

setting. If this happens, touch the CLOCK pad twice and reenter the time of day.

Touch the START/ON pad until the time of day shows in the display. This enters the time and starts the clock.

To check the time of day when the display is showing other information, simply touch the CLOCK pad. The time of day shows until another pad is touched.

Operating

To Turn Off the Clock Display

Cleaning

If you have several clocks in your kitchen, you may wish to turn off the time of day clock display on your range.

Touch the CLOCK pad once to turn off the time of day display. Although you will not be able to see it, the

clock maintains the correct time of day.

Touch the CLOCK pad twice to recall the clock display.

Troubleshooting Tips Care and

The timer is a minute timer only.

The CLEAR/OFF pad does not affect the timer.

To Set the Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

Touch the KITCHEN TIMER ON/OFF pad.

Touch the + or pads until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than 59 minutes should be changed to hours and minutes.

If you make a mistake, touch the KITCHEN TIMER ON/OFF pad and begin again.

Touch the START/ON pad. The time will start counting down, although the display does not change until one minute has passed.

When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the KITCHEN TIMER ON/OFF pad is touched.

Support

To Reset the Timer

If the display is still showing the time remaining, you may change it by touching the KITCHEN TIMER ON/OFF pad, then touching the + or pads until the time you want appears in the display.

If the remaining time is not in the display (clock, start time or cooking time are in the display), recall the remaining time by touching the KITCHEN TIMER ON/OFF pad and then touching the + or pads to enter the new time you want.

Consumer

To Cancel the Timer

Touch the KITCHEN TIMER ON/OFF pad twice.

10

Page 10
Image 10
GE JBP24 Using the clock and timer, Instructions Safety, Troubleshooting Tips Care and, To Set the Clock, To Set the Timer