GE JBP58 Customer Service Troubleshooting Tips, How to Delay the Start of Cleaning on some models

Care and Cleaning Operating Instructions Safety Instructions

Using the self-cleaning oven.

Never force the latch handle. Forcing the handle will damage the door lock mechanism.

How to Delay the Start of Cleaning (on some models)

Make sure the clock shows the correct time of day.

Latch the door.

Turn the Oven Temperature knob to CLEAN.

Press the START TIME pad.

Press the HOUR and MIN. pads to set the time cleaning will start.

When the LATCH DOOR light flashes, slide the latch handle to the left as far as it will go and turn the Oven Temperature knob to OFF.

Customer Service Troubleshooting Tips

After a Clean Cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap- filled steel wool pad and rinse thoroughly with a vinegar and water mixture.

These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

■You cannot set the oven for cooking until the oven is cool enough for the door to be unlatched.

■While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean countdown, press the COOK TIME pad.

■If the shelves become hard to slide, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

18