Using the surface units. | ge.com |
Throughout this manual, features and appearance may vary from your model.
Safety
Be sure you turn the control knob to OFF when you finish cooking.
Push the knob in and turn in either direction to the setting you want.
At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.
The appropriate HOT SURFACE indicator light will glow when its corresponding radiant element is turned on and will remain on until the surface has cooled below 150°F.
Hot surface indicator light will:
■Come on when the surface unit is turned on.
■Stay on even after the unit is turned off.■Glow until unit has cooled below 150°F.Instructions Operating
The dual surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware you are using.
To use the small surface unit, turn the control knob to the SMALL BURNER settings.
To use the large surface unit, turn the control knob to the LARGE BURNER settings.
Instructions Care
BURNER
SIZE9"
6" 12"
OFF
The rear center surface element offers 3 cooking areas to match the size of the cookware you are using.
To use the largest cooking area, push in and turn the SELECTOR knob to 12″. Push and turn the control knob to the desired setting.
To use the medium cooking area, press and turn the SELECTOR knob to 9″.
Push down and turn the control knob to the desired setting.
To use the smallest cooking area, turn the SELECTOR knob to 6″. Push and turn the control knob to the desired setting. This will activate only the smallest inside heating area.
and Cleaning
To use the bridge burner, turn the left front control knob to the BRIDGE BURNER settings.
For full bridge surface unit operation, also turn on the left rear surface unit.
To use only the front surface unit, turn the control knob to the FRONT BURNER settings.
7
Troubleshooting Tips Consumer Support