GE JDP36, JDP37 manual QUESTIONS? USE this Problem Solver, Care and Cleaning Problem Solver

QUESTIONS?

USE THIS PROBLEM SOLVER

PROBLEM	POSSIBLE CAUSE
“F–AND A NUMBER”	• If the time display flashes “F–and a number”, you have a function error code.
FLASH IN THE DISPLAY	Press the CLEAR/OFF pad. Allow oven to cool for one hour. Put oven back
	into operation. If the failure code repeats, disconnect all power to the range.
	Call for service.
OVEN WILL	• Plug on range is not completely inserted in the electrical outlet.
NOT WORK	• The circuit breaker in your house has been tripped, or a fuse has been blown.
	• Oven controls not properly set.
FOOD DOES NOT	• Oven controls not properly set. See the Broiling section.
BROIL PROPERLY	• Door not left open to the broil stop position as recommended.
	• Improper shelf position being used. See the Broiling section.
	• Food is being cooked on a hot pan.
	• Low voltage. See the Broiling section.
	• Cookware is not suited for broiling.
	• Aluminum foil used on the broiler pan rack has not been fitted properly
	and slit as recommended.
FOOD DOES NOT	• Oven controls are not properly set.
ROAST OR BAKE	• Shelf position is not correct.
PROPERLY
	• Incorrect cookware or cookware of improper size is being used.
	• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
	Do It Yourself section.
	• A foil tent was not used when needed to slow down browning during roasting.
OVEN LIGHT DOES	• Bulb may be loose or burned out.
NOT COME ON	• Electrical plug must be plugged into a live power outlet.
OVEN TEMPERATURE	• Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
TOO HOT OR TOO COLD	Do It Yourself section.
CONTROL BEEPS AFTER	• This is reminding you to enter a bake temperature.
ENTERING COOK TIME
OR STOP TIME
SURFACE UNITS	• Surface units are not plugged in solidly.
NOT FUNCTIONING	• Surface unit controls are not properly set.
PROPERLY
CLOCK AND TIMER	• Make sure the electrical plug is plugged into a live, properly grounded
DO NOT WORK	power outlet.
	• Check for power outage.
	(continued next page)

29

Care and Cleaning

The Problem Solver