THE PROBLEM SOLVER

 

 

 

 

(continued)

 

 

 

 

 

 

 

PROBLEM

POSSIBLE CAUSE

 

 

 

 

 

 

 

OVEN WILL NOT

• Stop Time must be more than 3 hours later than Start Time.

 

 

SELF-CLEAN

• Oven temperature is too high to set self-clean operation. Allow the range to

 

 

 

 

 

 

 

 

cool to room temperature and reset the controls.

 

 

 

 

 

 

 

OVEN NOT CLEAN AFTER

• Oven controls not set properly.

 

 

CLEAN CYCLE

1 2

 

 

 

 

• Heavily soiled ovens require a 3 ⁄ -4 hour clean time.

 

 

 

 

• Heavy spillovers should be cleaned up before starting the clean cycle.

 

 

 

 

 

 

 

“BURNING” OR “OILY”

• This is normal in a new oven and will disappear in time. To speed the process,

 

 

ODOR EMITTING FROM

set a self-clean cycle for a minimum of 3 hours. See the Operating the Self-

 

 

OVEN WHEN TURNED ON

Cleaning Oven section.

 

 

 

 

 

 

 

STRONG ODOR

• An odor from the insulation around the inside of the oven is normal for

 

 

 

 

the first few times the oven is used. This is temporary.

 

 

 

 

 

 

 

FAN NOISE

• A fan may automatically turn on and off to cool internal parts. This is normal,

 

 

 

 

and the fan may continue to run after the oven is turned off.

 

 

 

 

 

 

If you need more help...call, toll free: GE Answer Center® 800.626.2000

consumer information service

30

Page 30
Image 30
GE JDP37, JDP36 manual Problem Solver, Self-Clean