Installation Instructions

9INSTALLING THE ANTI-TIP DEVICE

WARNING!

■If the Anti-Tip Device supplied with the range does not fit this application, use the Anti-Tip Device WB02k10020.

■Range must be secured with an approved Anti-Tip device.

■Unless properly installed, the range could be tipped by you or a child standing, sitting or leaning on an open door.

■After installing the Anti-Tip device, verify that it is in place by carefully attempting to tilt the range forward.

■This range has been designed to meet all recognized industry tip standards for all normal conditions.

■The use of this device does not preclude tipping of the range when not properly installed.

A.Mark the wall where the RIGHT EDGE of the range is to be located. Be sure to allow for the countertop overhang if you intend to install the range next to cabinets.

Anti-Tip

device

Slotted head

screw

Wallplate Approx. 20°

21⁄8″

Marked edge

of range

B. Locate the outside edge of the device 21⁄8 ″ toward the center of the range from the marked edge of the range.

C. Using the device as a template, mark the position of the hole for the screw.

D. For wood construction, drill a pilot hole at an angle of 20 degrees from the horizontal. A nail or awl may be used if a drill is not available.

Mount the Anti-Tip device with the screw provided.

For cement or concrete construction, you will need a 1/4″ x 11⁄2″ lag bolt and a 1/2″ O.D. sleeve anchor, which are not provided. Drill the recommended size hole for the hardware.

9INSTALLING THE ANTI-TIP DEVICE (CONT.)

Wallboard

Back of range

Anti-Tip device

Wood screw

Install the sleeve anchor into the drilled hole and then install the lag bolt through the device. The bolts must be properly tightened as recommended for the hardware.

E. Slide the range against the wall, and check for proper installation by grasping the front edge of the cooktop and carefully attempting to tilt the range forward. The bracket should stop the range within 4 inches. If it does not, the bracket must be reinstalled.

WHEN ALL HOOKUPS ARE

COMPLETED

Make sure all controls are left in the off position. Make sure the flow of combustion and ventilation air to the range is unobstructed.

CONVERTING TO LP GAS (or converting back to natural gas from LP)

This range leaves the factory set for use with natural gas. If you want to convert to LP gas, the conversion must be performed by a qualified LP gas installer.

The conversion instructions and LP orifices can be found attached to the range next to the pressure regulator.

Keep these instructions and the orifices in case you want to convert back to natural gas.

45

Page 44 Page 46
Page 45
Image 45
GE JGBP31 installation instructions Installing the ANTI-TIP Device, When ALL Hookups are Completed
Page 44 Page 46

JGBP31 specifications

The GE JGBP31 is a versatile and reliable gas range designed to meet the needs of both casual cooks and culinary enthusiasts. With a perfect blend of style and efficiency, this gas range features a sleek design that fits seamlessly into any modern kitchen decor. Sturdily constructed, it is built with high-quality materials to ensure durability and longevity.

One of the standout features of the GE JGBP31 is its powerful burners. It comes equipped with four sealed burners that allow for precise temperature control. The burners range from a high-output burner for searing and boiling to a low simmer burner for delicate sauces and melting chocolate. This versatility makes it an excellent choice for a wide range of cooking techniques.

Another notable characteristic of the GE JGBP31 is the large oven capacity. The oven is spacious enough to accommodate multiple dishes at once, making it perfect for family meals and gatherings. The oven also features an innovative convection cooking system, which circulates hot air for even heat distribution. This ensures that dishes are cooked uniformly whether baking, roasting, or broiling.

The range also includes a self-cleaning feature, which saves time and effort for the user. With the push of a button, the oven can clean itself using high temperatures to burn away residue, allowing for a hassle-free cleaning experience. Additionally, the oven has a built-in temperature probe that provides accurate readings of the internal temperature of meats, ensuring perfectly cooked results every time.

For safety, the GE JGBP31 is equipped with features like the electronic ignition system, which eliminates the need for a standing pilot light. This not only enhances safety but also improves energy efficiency. The control knobs are designed with a smooth operation in mind, allowing for easy adjustments while cooking.

This model also emphasizes user-friendly design, featuring a clear and easy-to-read control panel. With its attention to functionality, style, and safety, the GE JGBP31 stands out as a quality gas range that caters to every cooking enthusiast's needs, making it a dependable choice in today's kitchens.
Top Page Image Contents