8LEVELING THE RANGE

1.Remove the storage drawer or kick panel.

2. Use a 5 mm (3/16″) open-end or socket wrench to back out both rear leveling legs approximately two turns.

3. Use a 3.5 cm (13⁄8″) open-end or adjustable wrench to back out the front leveling legs two turns.

4.Install the oven

shelves in the oven and position the range where it will be installed.

5.Check for levelness by placing a spirit level or a cup, partially filled with water, on one of the oven shelves. If using a spirit level, take two readings—with the level placed diagonally first in one direction and then the other.

6.Adjust the leveling legs until the range is level.

7.After the range is level, slide the range

away from the wall so that the Anti-Tip device can be installed.

9 INSTALLING THE ANTI-TIP DEVICE

WARNING:

•Range MUST be secured with an approved Anti-Tip device.

•Unless properly installed, the range could be tipped by you or a child standing, sitting or leaning on an open door.

•After installing the Anti-Tip device, verify that it is in place by carefully attempting to tilt the range forward.

•This range has been designed to meet all recognized industry tip standards for all normal conditions.

•The use of this device does not preclude tipping of the range when not properly installed.

•If the Anti-Tip device supplied with the range does not fit this application, use the universal Anti-Tip device WB02X7909.

1.Mark the wall where the RIGHT EDGE of the range is to be located. Be sure to allow for the countertop overhang if you intend to install the range next to cabinets.

 

Anti-Tip

 

Device

Slotted

 

Head

Wallplate

Screw

 

Approx. 20°

Marked Edge

5.4 cm of Range (21⁄8″)

2.Locate the outside edge of the device 5.4 cm (21⁄8″) toward the center of the range from the marked edge of the range.

3.Using the device as a template, mark the position of the hole for the screw.

4.For wood construction, drill a pilot hole at an angle of 20 degrees from the horizontal. A nail or awl may be used if a drill is not available.

Mount the Anti-Tip device with the screw provided.

For cement or concrete construction, you will need a 6 mm x 3.8 cm (1/4″ x 11⁄2″) lag bolt and a

1.3cm (1/2″) O.D. sleeve anchor, which are not provided. Drill the recommended size hole for the hardware.

Install the sleeve anchor into the drilled hole and then install the lag bolt through the device. The bolts must be properly tightened as recommended for the hardware.

Wallboard

Back of

Range

 

Anti-Tip

Device

Wood Screw

Wallplate

5.Slide the range against the wall, and check for proper installation by grasping the front edge of the cooktop and carefully attempting to tilt the range forward.

WHEN ALL HOOKUPS ARE COMPLETED:

MAKE SURE ALL CONTROLS ARE LEFT IN THE OFF POSITION.

MAKE SURE THE FLOW OF COMBUSTION AND VENTILATION AIR TO THE RANGE IS UNOBSTRUCTED.

43

Page 42 Page 44
Page 43
Image 43
GE JGBP35GXA, JGBP35GZA installation instructions Leveling the Range
Page 42 Page 44

JGBP35GXA, JGBP35GZA specifications

The GE JGBP35GZA and JGBP35GXA are two notable models within GE's line of gas ranges, designed to deliver performance, reliability, and convenience for everyday cooking needs. These ranges combine traditional design with modern features, making them suitable for a variety of kitchen styles and cooking preferences.

Both models are equipped with a powerful gas cooktop that features four burners, providing versatility for different cooking tasks. The sealed burners are designed to contain spills, making clean-up a breeze. The burners deliver precise heat settings, allowing home chefs to have complete control over their cooking, from simmering sauces to searing meats.

A standout feature of the GE JGBP35GZA and JGBP35GXA is their large oven capacity, which provides ample space for multiple dishes. The oven uses a conventional gas heating system that promotes even cooking and browning, ensuring meals are cooked thoroughly. Additionally, the oven incorporates a broiler for achieving that perfect golden finish on casseroles and meats.

Another characteristic that sets these models apart is their ease of use. The ovens offer an electronic ignition system, eliminating the need for a pilot light, which enhances safety and efficiency. Both models are designed with user-friendly controls that make setting the oven temperature straightforward and intuitive.

Energy efficiency is also a notable aspect of these ranges. The gas cooking technology allows for faster heating times compared to electric ranges, saving both time and energy. This is especially beneficial for busy households looking to prepare meals quickly without sacrificing quality.

For those who enjoy baking, the GE JGBP35GZA and JGBP35GXA come equipped with features such as self-cleaning options. This reduces the hassle of maintenance, allowing users to focus more on cooking and less on clean-up.

Overall, the GE JGBP35GZA and JGBP35GXA are reliable gas ranges that combine functionality, efficiency, and modern convenience. Their robust construction, coupled with innovative features, makes them ideal for anyone looking to elevate their cooking experience. Whether you are a novice cook or a seasoned chef, these gas ranges provide the tools necessary to create delicious meals with ease. The GE JGBP35GZA and JGBP35GXA are a testament to GE's commitment to quality and customer satisfaction in the realm of home cooking.
Top Page Image Contents