GE JT91530 Safety, Instructions Care and Cleaning, Instructions Operating, Tone Volume, ge.com

ge.com

Tones at the End of a Timed Cycle

Safety

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is pressed. This continuous 6-second beep may be canceled.

To cancel the 6-second beep:

Press the BAKE and BROIL HI/LO pads (on double oven models use the upper oven controls) at the same time for 3 seconds, until the display shows SF.

Press the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continuous beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)

Press the START pad.

NOTE: On double oven models, this cancels the end-of-cycle tone for both ovens.

Instructions Operating

Tone Volume

This feature allows you to adjust the tone volumes to a more acceptable volume. There are three possible volume levels.

Press the BAKE and BROIL HI/LO pads (on double oven models, use the upper oven controls) at the same time for 3 seconds, until the display shows SF.

Press the OVEN LIGHT ON/OFF pad. The display will show 2 BEEP. This is the middle volume level.

Press the OVEN LIGHT ON/OFF pad again. The display will show 3 BEEP. This is the loudest volume level.

Press the OVEN LIGHT ON/OFF pad again. The display will show 1 BEEP. This is the quietest volume level.

For each time the level is changed, a tone will sound to provide an indication of the volume level.

Choose the desired sound level (1 BEEP, 2 BEEP or 3 BEEP).

Press the START pad to activate the desired level shown.

NOTE: On double oven models, this activates this special feature for both ovens.

Instructions Care and Cleaning

Auto Recipe™ Conversion

When using convection bake, the Auto Recipe™ Conversion feature will automatically convert entered regular baking temperatures to convection baking temperatures.

This feature is activated so that the display will show the actual converted (reduced) temperature. For example, if you enter a regular recipe temperature of 350°F and press the START pad, the display will show CON

and the converted temperature of 325°F.

NOTE: This feature does not convert convection bake cooking times, only regular baking temperatures.

To deactivate the feature:

Press the BAKE and BROIL HI/LO pads (on double oven models, use the upper oven controls) at the same time for 3 seconds, until the display shows SF.

Press the CONVECTION BAKE pad. The display will show CON ON. Press the CONVECTION BAKE pad again. The display will show CON OFF.

Press the START pad.

To reactivate the feature, repeat steps 1–3 above but press the START pad when CON ON is in the display.

Troubleshooting Tips Consumer Support

7