QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM | POSSIBLE CAUSE |
|
|
SURFACE UNITS DO | • Difficulty may be in the main distribution panel of your house caused by a |
NOT WORK PROPERLY | blown oven circuit fuse, a tripped oven circuit breaker, the main fuse or the |
| main circuit breaker, depending on the nature of the power supply. If a circuit |
| breaker is involved, reset it. If the control box uses fuses, the oven fuse |
| (a |
| WITH ELECTRICAL CIRCUITS. If after doing one of these procedures, the |
| fuse blows or circuit breaker trips again, call for service. |
| NOTE: Apartment tenants or condominium owners should request their building |
| management to perform this check before calling for service. |
| • Drip pans are not set securely in the cooktop. |
| • Surface unit controls are not properly set or wrong surface unit control is |
| set for unit you are using. |
| • Surface units are not plugged in solidly. |
|
|
If you need more help…call, toll free: GE Answer Center®
800.626.2000
consumer information service
14
