Instructions

Using the Sabbath Feature (on some models).

(Designed for use on the Jewish Sabbath and Holidays.)

The Sabbath feature can be used for baking/roasting only. It cannot be used for broiling, self-cleaning or Delay Start cooking.

NOTE: The oven light comes on automatically when the door is opened and goes off when the door is closed. The bulb may be removed. See the Oven Light Replacement section. On models with a light switch on the control panel, the oven light may be turned on and left on.

Operating Instructions Safety

+

When the display shows the oven is set in Sabbath. When the display shows ⊃ ⊃ the oven is baking/roasting.

How to Set for Regular Baking/Roasting

Make sure the clock shows the correct time of day.

Press and hold both the BAKE and BROIL HI/LO pads, at the same time, until the display shows SF.

NOTE: If bake or broil appears in the display, the BAKE and BROIL HI/LO pads were not pressed at the same time. Press the CLEAR/OFF pad and begin again.

Tap the DELAY START pad until SAb bAtH appears in the display.

Press the START pad and ⊃ will appear in the display.

Press the BAKE pad. No signal will be given.

Using the number pads, enter the desired temperature between 170°F and 550°F. No signal or temperature will be given.

Press the START pad.

After a random delay period of approximately 30 seconds to 1 minute,

⊃ will appear in the display

indicating that the oven is baking/roasting. If ⊃ ⊃ doesn’t appear in the display, start again at Step 4.

To adjust the oven temperature, press the BAKE pad, enter the new temperature using the number pads and press the START pad.

NOTE: The CLEAR/OFF and COOKING TIME pads are active during the Sabbath feature.

How to Set for Timed Baking/Roasting – Immediate Start and Automatic Stop

Troubleshooting Tips Care and Cleaning

+

When the display shows the oven is set in Sabbath. When the display shows ⊃ ⊃ the oven is baking/roasting.

Make sure the clock shows the correct time of day.

Press and hold both the BAKE and BROIL HI/LO pads, at the same time, until the display shows SF.

NOTE: If bake or broil appears in the display, the BAKE and BROIL HI/LO pads were not pressed at the same time. Press the CLEAR/OFF pad and begin again.

Tap the DELAY START pad until SAb bAtH appears in the display.

Press the START pad and ⊃ will appear in the display.

Press the COOKING TIME pad.

Press the number pads to set the desired length of cooking time between

1 minute and 9 hours and 99 minutes. The cooking time that you entered will be displayed.

Press the START pad.

Press the BAKE pad. No signal will be given.

Using the number pads, enter the desired temperature. No signal or temperature will be given.

Press the START pad.

After a random delay period of approximately 30 seconds to 1 minute,

⊃ will appear in the display indicating that the oven is baking/roasting. If ⊃ ⊃

doesn’t appear in the display, start again at Step 7.

To adjust the oven temperature, press the BAKE pad, enter the new temperature using the number pads and press the START pad.

When cooking is finished, the display will change from ⊃ ⊃ to ⊃ and 0:00 will appear, indicating that the oven has turned

OFF but is still set in Sabbath. Remove the cooked food.

Consumer Support

+

20

How to Exit the Sabbath Feature

Press the CLEAR/OFF pad.

If the oven is cooking, wait for a random delay period of approximately 30 seconds to 1 minute, until only ⊃

is in the display.

Press and hold both the BAKE and BROIL HI/LO pads, at the same time, until the display shows SF.

Tap the DELAY START pad until 12 shdn or no shdn appears in the display.

12 shdn indicates that the oven will automatically turn off after 12 hours. no shdn indicates that the oven will not automatically turn off.

Press the START pad.

NOTE: If a power outage occurred while the oven was in Sabbath, the oven will automatically turn off and stay off even when the power returns. The oven control must be reset.

Page 20
Image 20
GE JS900, JD900 Using the Sabbath Feature on some models, Consumer Support, How to Set for Regular Baking/Roasting

JD900, JS900 specifications

The GE JS900 and JD900 are advanced gas turbine models from General Electric, designed for efficiency and performance in power generation. These turbines represent the innovative spirit of GE, incorporating cutting-edge technologies to meet the demands of modern energy markets.

The GE JS900 is a versatile model used primarily in combined cycle power plants. One of its standout features is its ability to achieve high thermal efficiency, reaching levels of around 60 percent. This efficiency translates into lower fuel consumption and reduced emissions, making it an environmentally friendly choice for energy producers. The JS900 utilizes a larger aerodynamic blade design and advanced cooling techniques, which enable it to operate at higher temperatures, thus enhancing its overall performance.

On the other hand, the GE JD900 is designed for industrial applications, particularly in the oil and gas sector. It boasts a robust construction that can withstand the harsh conditions typical within these environments. The JD900 features a unique combustion system that minimizes nitrogen oxide emissions while maintaining a high power output. Its modular design allows for easier maintenance and faster installation compared to other models, making it a preferred choice for operators looking for operational efficiency.

Both turbines are equipped with GE's Digital Wind Farm technology, which utilizes real-time data analysis to optimize performance and reliability. This technology allows operators to monitor and adjust settings dynamically, ensuring maximum efficiency and reducing downtime. Additionally, the JD900 and JS900 both feature advanced control systems that enable seamless integration with existing power plant operations.

Both models also emphasize flexibility in fuel options. They can operate on a variety of fuels, including natural gas, liquid fuels, and even biofuels, which adds to their adaptability in different geographical locations and energy markets.

In conclusion, the GE JS900 and JD900 turbines stand at the forefront of gas turbine technology, embodying efficiency, sustainability, and adaptability. Their advanced features, combined with GE's commitment to innovation, make them ideal choices for a variety of energy applications, meeting the needs of industries while promoting environmental responsibility.