GE JD900, JS900 Care and cleaning of the range, Control Knobs, Oven Vent, Operating Instructions

Models: JD900 JS900

1 36
Download 36 pages 7.82 Kb
Page 21
Image 21
Care and cleaning of the range.

Care and cleaning of the range.

ge.com

Be sure all controls are off and all surfaces are cool before cleaning any part of the range.

If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is reengaged properly when the range is replaced. Failure to take this precaution could result in tipping of the range and cause injury.

How to Remove Protective Shipping Film and Packaging Tape

Safety Instructions

Carefully grasp a corner of the protective shipping film with your fingers and slowly peel it from the appliance surface. Do not use any sharp items to remove the film. Remove all of the film before using the appliance for the first time.

To assure no damage is done to the finish of the product, the safest way to remove the adhesive from packaging tape on new appliances is an application of a household liquid dishwashing detergent. Apply with a soft cloth and allow to soak.

NOTE: The adhesive must be removed from all parts. It cannot be removed if it is baked on.

Operating Instructions

Control Knobs

The control knobs may be removed for easier cleaning.

Make sure the knobs are in the OFF positions and pull them straight off the stems for cleaning.

The knobs can be cleaned in a dishwasher or they may also be washed with soap and water. Make sure the insides of the knobs are dry before replacing.

Replace the knobs in the OFF position to ensure proper placement.

Care and Cleaning

Oven Vent

The oven vent is located above the left side of

It is normal for steam to come out of

the door.

the vent.

This area could become hot during

The vent is important for proper air circulation.

oven use.

Never block this vent.

Stainless Steel Surfaces (on some models)

Troubleshooting

Do not use a steel wool pad; it will scratch the surface.

To clean the stainless steel surface,

use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.

To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free number:

National Parts Center

1.800.626.2002

ge.com

Tips Consumer Support

21

Page 21
Image 21
GE JD900, JS900 Care and cleaning of the range, How to Remove Protective Shipping Film and Packaging Tape, Control Knobs