Manuals / GE / Kitchen Appliance / Oven

GE JSP26, JSP34 owner manual Instructions Operating Instructions, Oven Light Bulb on some models

Models: JSP26 JSP34

1 32
Download 32 pages 11.45 Kb
Page 23
Image 23

GEAppliances.com

Safety

Socket

31⁄2”

Maximum length

Bulb

Tab

Glass cover

Oven Light Bulb (on some models)

NOTE: The glass cover (on some models) should be removed only when cold. Wearing latex gloves may offer a better grip.

Before replacing the bulb, disconnect electrical power to the range at the main fuse or circuit breaker panel. Let the bulb cool completely before removing it. For your safety, do not touch a hot bulb with a damp cloth. If you do, the bulb will break.

To remove:

Turn the glass cover counterclockwise 1/4 turn until the tabs of the glass cover clear the grooves of the socket. Remove the bulb.

To replace:

Put in a new 40-watt appliance bulb. Place the tabs of the glass cover into the groove of the socket. Turn the glass cover clockwise 1/4 turn.

NOTE:

■A 40-watt appliance bulb is smaller than a standard 40-watt household bulb.

■Reconnect electrical power to the range.

■For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is completely cool.

Instructions Operating Instructions

Socket

Bulb

31⁄2”

Maximum length

Glass cover

Oven Light Bulb (on some models)

NOTE: The glass cover should be removed only when cold. Wearing latex gloves may offer a better grip.

Before replacing the bulb, disconnect electrical power to the range at the main fuse or circuit breaker panel. Let the bulb cool completely before removing it. For your safety, do not touch a hot bulb with a damp cloth. If you do, the bulb will break.

To remove:

Turn to remove the cover, then remove the bulb.

To replace:

Put in a new 40-watt appliance bulb.

NOTE:

■A 40-watt appliance bulb is smaller than a standard 40-watt household bulb.

■Install and tighten the cover.

■Reconnect electrical power to the range.

■For improved lighting inside the oven, clean the glass cover frequently using a wet cloth. This should be done when the oven is completely cool.

Care and Cleaning Troubleshooting

The storage drawer may be removed for cleaning under the range.

Storage Drawer Removal

To remove the drawer:

Pull the drawer straight out and lift over the guide stops.

To replace the drawer:

Lift over the guide stops and slide the drawer into place.

To clean both the inside and the outside: Wipe with soap and water. Rinse well.

Do not use cleansing powders or harsh abrasives which may scratch the surface.

The storage drawer is a good place to store cookware and bakeware. Do not store plastics and flammable material in the drawer.

Do not overload the storage drawer. If the drawer is too heavy, it may slip off the track when opened.

Tips Consumer Support

23

Page 22 Page 24
Page 23
Image 23
GE JSP26 Instructions Operating Instructions, Oven Light Bulb on some models, Storage Drawer Removal, To remove the drawer
Page 22 Page 24

JSP26, JSP34 specifications

The GE JSP34, JSP26, JSP31, and JSP28 are cutting-edge jet engine models developed by General Electric, designed to power the next generation of commercial and military aircraft. Each model incorporates advanced technologies and innovative features that enhance performance, efficiency, and reliability.

The JSP34 engine is characterized by its high thrust-to-weight ratio, making it ideal for high-performance aircraft. It utilizes a new composite fan blade design that reduces weight while increasing aerodynamic efficiency. The advanced turbofan architecture allows for lower noise emissions and improved fuel efficiency. Additionally, the JSP34 is equipped with smart engine health monitoring systems, enabling proactive maintenance scheduling and minimizing downtime.

The JSP26 model is tailored for regional jets and smaller commercial aircraft. It features a state-of-the-art bypass ratio, providing exceptional fuel efficiency for short-haul flights. One of its standout technologies is the variable area nozzle, which optimizes performance across various flight regimes. The JSP26's modular design ensures easier maintenance and quicker turnaround times, crucial for regional operators.

The JSP31 engine focuses on versatility and adaptability, making it suitable for both commercial and military applications. Its multi-modal operation capability allows for a seamless transition between different mission profiles. The engine incorporates adaptive control technologies that optimize performance based on altitude and weight, ensuring superior operational efficiency. Enhanced materials and thermal barrier coatings contribute to improved durability and longevity, catering to the demands of varied operational environments.

Lastly, the JSP28 is designed with an emphasis on sustainability and the reduction of environmental impact. Its advanced blade materials and aerodynamic shapes contribute to reduced fuel consumption and lower CO2 emissions. The JSP28 engine features noise-reducing technologies that meet stringent regulatory requirements while enhancing passenger comfort. Furthermore, it is compatible with sustainable aviation fuels (SAFs), aligning with global initiatives aimed at fostering greener aviation practices.

In summary, the GE JSP34, JSP26, JSP31, and JSP28 engines represent significant advancements in aviation technology, each tailored to meet specific operational needs while achieving impressive performance metrics, fuel efficiency, and environmental sustainability. As the aviation industry continues to evolve, these engines embody the future of flight with their innovative characteristics and technologies.