■ This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair or adjustment. Do not repair or replace any part of this appliance unless specifically recommended in this manual. All other servicing should be referred to a qualified technician.
installed in a cabinet that is firmly attached to the house structure. Weight on the oven door could cause the oven to tip and result in injury. Never allow anyone to climb, sit or hang on the oven door.
■ Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.
installed and grounded by a qualified technician in accordance with the provided Installation Instructions.
WARNING—Grounding Instructions: This appliance must be connected to a grounded, metallic, permanent wiring system, or an equipment grounding conductor should be run with the circuit conductors and connected to the equipment grounding terminal or lead on the appliance.
WARNING—To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy:
■ Use this appliance only for its intended use as described in this manual. Do not use corrosive chemicals or vapors in this appliance. This cooking center is specifically designed to heat or cook food, and is not intended for laboratory or industrial use.

www.GEAppliances.com

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

■ Do not store this appliance outdoors. Do not use this product near water— for example, in a wet basement, or near a swimming pool.

■ Before performing any service, disconnect the cooking center power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

■ Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped.

■ Do not leave children alone—children should not be left alone or unattended in an area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

■ Don’t allow anyone to climb, stand or

■ Be sure your appliance is properly

hang on the door. They could damage the cooking center and cause severe personal injury.

■ CAUTION: Items of interest to children should not be stored in cabinets above an oven; children climbing on the

Safety Instructions Operating Instructions Care and Cleaning

■ Be sure the cooking center is securely

oven to reach items could be seriously injured.

■ Teach children not to play with the controls or any other part of the cooking center.

■ Large scratches or impacts to glass door

can lead to broken or shattered glass.

■ Wear proper clothing. Loose-fitting or hanging garments should never be worn while using the appliance. Flammable material could be ignited if brought in contact with hot heating elements and may cause severe burns.

3

Troubleshooting Tips Consumer Support

Page 2 Page 4
Page 3
Image 3
GE JT965 manual Safety Precautions, Troubleshooting Tips Consumer Support
Page 2 Page 4

JT965 specifications

The GE JT965 is a high-performance gas turbine engine notable for its efficiency, reliability, and cutting-edge technology in power generation and industrial applications. Leveraging innovative design and advanced materials, the JT965 provides an optimal solution for users seeking effective energy solutions.

One of the main features of the JT965 is its impressive thermal efficiency, which can exceed 40%, making it one of the leaders in its class. This high efficiency translates directly into lower operational costs and reduced emissions, contributing to a more sustainable power generation landscape. Operators can rely on the JT965 to deliver robust performance while adhering to environmental regulations.

The JT965 incorporates state-of-the-art aerodynamics, which enhances the overall performance of the turbine. The advanced compressor design, with its multi-stage high-bypass ratios, ensures a consistent airflow, resulting in improved combustion efficiency and power output. Additionally, the turbine blades are crafted from advanced nickel-based superalloys, which are capable of maintaining strength and integrity even at high temperatures.

Another standout characteristic of the JT965 is its modular design. Components can be easily replaced or upgraded, reducing maintenance downtime and simplifying service protocols. This modularity allows operators to keep the engine running efficiently over its lifecycle. Moreover, the JT965 is designed with advanced monitoring systems that provide real-time data on performance metrics, enabling predictive maintenance and further enhancing reliability.

The turbine's operational flexibility is also a significant advantage. It can run on a variety of fuels, including natural gas and liquid fuels, making it adaptable to various energy markets around the globe. This versatility allows operators to optimize fuel use based on availability and cost, contributing to overall economic efficiency.

In summary, the GE JT965 gas turbine engine epitomizes modern engineering excellence, with its high thermal efficiency, advanced materials, and innovative design features. Its adaptability to different fuel types and ease of maintenance make it a compelling choice for power generation and industrial users, setting a benchmark for future developments in the field of gas turbine technology.
Top Page Image Contents