24
Safety Instructions
Operating Instructions
Care and CleaningTroubleshooting TipsConsumer Support
Special features of your lower oven control.

Your new touch pad control has additional features that you may choose to use. The following are the features and

how you may activate them.

The special feature modes can only be activated while the display is showing the time of day. They remain in the

control’s memory until the steps are repeated.

When the display shows your choice, press the STARTpad. The special features will remain in memory after

a power failure.

12-Hour Shut-Off

With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn OFF this feature,
follow the steps below.
Press the BAKE and BROIL HI/LO
pads at the same time for 3 seconds,
until the display shows SF.
Press the DELAY START pad until
no shdn (no shut-off) appears in
the display.
Press the START pad to activate the
no shut-off and leave the control set
in this special features mode.
+

Fahrenheit or Celsius Temperature Selection

Your oven control is set to use the Fahrenheit
temperature selections, but you may change this
to use the Celsius selections.
Press the BROIL HI/LO and BAKE
pads at the same time for 3 seconds,
until the display shows SF.
Press the COOKINGTIME and BROIL
HI/LO pads at the same time. The
display will show F(Fahrenheit).
Press the COOKINGTIME and BROIL
HI/LO pads again at the same time.
The display will show C(Celsius).
Press the START pad.
+
+
Your control will allow you to lock out the touch
pads so they cannot be activated when pressed.
To lock/unlock the controls:
Press the 9and 0 pads at the same
time for 3 seconds, until the display
shows LOC ON.
To unlock the control, press the 9
and 0 pads at the same time for 3
seconds, until the display shows
LOC OFF.
When this feature is on and the touch
pads are pressed, the control will beep
and the display will show LOC ON.
The control lockout mode affects all touch
pads. No touch pads will work when this
feature is activated.
The adjustment will be retained in memory
after a power failure.

Control Lockout