Using the lower oven probe | GE JT965 instruction

Using the lower oven probe.

www.GEAppliances.com

For many foods, especially roasts and poultry, internal food temperature is the best test for doneness.

The temperature probe takes the guesswork out of roasting by cooking foods to the exact doneness you want.

Safety

The temperature probe has a skewer-like probe at one end and a plug at the other end that goes into the outlet in the oven.

NOTE: The probe is for use in the lower oven only.

Use of probes other than the one provided with this product may result in damage to the probe.

Use the handles of the probe and plug when inserting and removing them from the meat and outlet.

■To avoid damaging your probe, do not use tongs to pull on the cable when removing it.

■To avoid breaking the probe, make sure food is completely defrosted before inserting.

Cable

Plug

Probe

Handles

■To prevent possible burns, do not unplug the probe from the outlet until the oven has cooled.

■Never leave your probe inside the oven during a self-cleaning cycle.

■Do not store the probe in the cooking center.

Instructions Operating Instructions

After preparing the meat and placing it on a trivet or on the broiler pan grid, follow these directions for proper probe placement.

Lay the probe on the outside of the meat along the top or side and mark with your finger where the edge of the meat comes to on the probe. The point should rest in the center of the thickest meaty part of the roast.

Insert the probe completely into the meat. It should not touch the bone, fat or gristle.

For roasts with no bone, insert the probe into the meatiest part of the roast. For bone-in ham or lamb, insert the probe into the center of the lowest large muscle or joint.

Insert the probe into the center of dishes such as meat loaf or casseroles. When cooking fish, insert the probe from just above the gill into the meatiest area, parallel to the backbone.

Insert the probe into the meatiest part of the inner thigh from below and parallel to the leg of a whole turkey.

Care and Cleaning

How to Set the Oven For Roasting When Using the Probe

Insert the probe into the meat.

Plug the probe into the outlet in the oven. Make sure it’s pushed all the way in. Close the oven door.

Press the PROBE pad.

Press the number pads to set the desired internal food or meat temperature. The maximum internal temperature for the food that you can set is 200°F.

Press the BAKE pad.

Press the number pads to set the desired oven temperature.

Press the START pad.

The display will flash if the probe is inserted into the outlet and you have not set a probe temperature and pressed the START pad.

When the oven starts to heat, the word LO will be in the display.

After the internal temperature of the meat reaches 100°F, the changing internal temperature will be shown in the display.

When the internal temperature of the meat reaches the temperature you have set, the probe and the oven turn off and the oven control signals. To stop the signal, press the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it—they might damage it.

To change the oven temperature during the Roast cycle, press the BAKE pad and then the number pads to set the new temperature.

■If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

■You can use the timer even though

you cannot use timed oven operations.

Troubleshooting Tips Consumer Support

JT965 specifications

The GE JT965 is a high-performance gas turbine engine notable for its efficiency, reliability, and cutting-edge technology in power generation and industrial applications. Leveraging innovative design and advanced materials, the JT965 provides an optimal solution for users seeking effective energy solutions.

One of the main features of the JT965 is its impressive thermal efficiency, which can exceed 40%, making it one of the leaders in its class. This high efficiency translates directly into lower operational costs and reduced emissions, contributing to a more sustainable power generation landscape. Operators can rely on the JT965 to deliver robust performance while adhering to environmental regulations.

The JT965 incorporates state-of-the-art aerodynamics, which enhances the overall performance of the turbine. The advanced compressor design, with its multi-stage high-bypass ratios, ensures a consistent airflow, resulting in improved combustion efficiency and power output. Additionally, the turbine blades are crafted from advanced nickel-based superalloys, which are capable of maintaining strength and integrity even at high temperatures.

Another standout characteristic of the JT965 is its modular design. Components can be easily replaced or upgraded, reducing maintenance downtime and simplifying service protocols. This modularity allows operators to keep the engine running efficiently over its lifecycle. Moreover, the JT965 is designed with advanced monitoring systems that provide real-time data on performance metrics, enabling predictive maintenance and further enhancing reliability.

The turbine's operational flexibility is also a significant advantage. It can run on a variety of fuels, including natural gas and liquid fuels, making it adaptable to various energy markets around the globe. This versatility allows operators to optimize fuel use based on availability and cost, contributing to overall economic efficiency.

In summary, the GE JT965 gas turbine engine epitomizes modern engineering excellence, with its high thermal efficiency, advanced materials, and innovative design features. Its adaptability to different fuel types and ease of maintenance make it a compelling choice for power generation and industrial users, setting a benchmark for future developments in the field of gas turbine technology.

GE JT965 manual Using the lower oven probe, Troubleshooting Tips Consumer Support

Models: JT965