GE JTS1030 Cleaning and Care Instructions Operating Instructions Safety, Support Consumer Tips Troubleshooting

Using the oven controls.

GEAppliances.com

Throughout this manual, features and appearance may vary from your model.

Oven Control, Clock and Timer Features and Settings

	BAKE/TEMP RECALL Pad	KITCHEN TIMER ON/OFF Pad
	Press this pad to select the bake function.	Touch this pad to select the timerfeature.
	BAKE Light	Then press + and – pads to adjust time.
	BAKE Light	TIMER Light
	Flashes while in edit mode—you can change	TIMER Light
	the oven temperature at this point. Glows	Flashes while in edit mode—you can change
	when the oven is in bake mode.	the set time at this point. Glows when the
	START/ON Pad	timer has been activated. Flashes again when
	START/ON Pad	the time has run out until the control is reset.
	Must be pressed to start any cooking function.	the time has run out until the control is reset.
	Must be pressed to start any cooking function.

Cleaning and Care Instructions Operating Instructions Safety

Display

Shows the time of day,oven temperature, whether the oven is in the bake or broil mode and the times set for the timeror automatic oven operations. The display will show “PrE” while preheating. When the oven reaches the selected temperature, the oven control will beep and the display will show the oven temperature.

If “F–” and a number or letter flash in the display and the oven control signals, this indicates a function error code. Press the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation.

If the function error code repeats, disconnectthe power to the range and call for service.

If your oven was set for a timed oven operation and a poweroutage occurred, the clock and all programmed functions must be reset.

The time of day will flash in the display when there has been a power outage. Reset the clock.

CLOCK Pad

Toset the clock, press this pad twiceand then press the + and – pads. The time of day will flashin the display when the oven is first turned on.

DELAY START Pad

Use alongwith the COOKING TIME pad to set the oven to start and stop automatically at a time you set.

DELAY START TimeLight

Flashes while in edit mode—you can change the delay start set time at this point. Glows when the function has been activated.

COOKING TIME Pad

Press this pad and then touchthe + or – pads to set the amountof time you want your food to cook. The oven will shut off when the cookingtime has run out.

COOKING TIME Light

Flashes while in edit mode—you can change the set time at this point. Glows when the function has been activated. Flashes again when the time has run out until the control is reset.