Using the clockand timer. | GEAppliances.com |
Safety
Make sure the clock is set to the correct time of day.
The clock must be set to the correcttime of day for the automatic oven timing functions to work properly.The time of day cannot be changed during a delayed cookingcycle.
Press the CLOCK pad twice.
Press the + or – pads.
If the + or – pads are not pressed within one minute after you press the CLOCK pad, the display reverts to the original
setting.If this happens, press the CLOCK pad twiceand reenter the time of day.
Press the START/ON pad until the time of day shows in the display. This entersthe time and starts the clock.
To checkthe time of day when the displayis showing other information, simplypressthe CLOCK pad. The time of day showsuntil another pad is pressed.
Operating Instructions
If you have several clocksin your kitchen, you may wish to turn off the time of day clock display on your range.
Press the CLOCK pad once to turn off the time of day display.Although you will not be able to see it, the clock maintains the correct time of day.
Pressthe CLOCK pad twiceto recall the clockdisplay.
The timer is a minute timer only.
The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.
The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.
Press the KITCHEN TIMER ON/OFF pad.
Press the + or – pads until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than 59 minutes should be changed to hours and minutes.
If you make a mistake, pressthe KITCHEN TIMER ON/OFF pad and beginagain.
Pressthe START/ON pad. The time will start counting down, although the display does not change until one minutehas passed.
When the timer reaches :00, the controlwill beep 3 times followed by one beep every 6 seconds until the KITCHEN TIMER ON/OFF pad is pressed.
If the display is still showing the time remaining, you may changeit by pressing the KITCHEN TIMER ON/OFF pad, then pressing the + or – pads until the time you want appears in the display.
If the remaining time is not in the display (clock,delay start set time or cooking time are in the display), recall the remaining time by pressing the KITCHEN TIMER ON/OFF pad and then pressing the + or – pads to enter the new time you want.
Press the KITCHEN TIMER ON/OFF pad | 9 |
twice. |
Support