GE JVM140H warranty Cooktop Light/Night Light Oven Light

Cooktop Light/Night Light Oven Light

Clean off the grease and dust on hood surfaces often. Use a warm detergent solution. About 1 tablespoon of ammonia maybe added to the water. Take care not to touch the filters and enameled surfaces with this. Ammonia will tend to darken metal.

REMOVE SCREW

To replace combination cooktop light/night light, first disconnect power at main fuse or circuit breaker panel or pull plug. Remove screw on right side of light compartment cover and lower cover until it stops.

I

Be sure bulbs to be replaced are cool before removing. Break the adhesive seal by gently unscrewing the bulbs. Replace with 40-watt incandescent bulbs (WB2X4253) available from your GE supplier. High intensity 40-watt bulbs (40SllN/1) which are available in supermarkets and hardware stores may also be used for replacements. Raise light compartment cover and replace screw. Connect electrical power to microwave oven.

To replace your oven light, first disconnect power at main fuse or circuit breaker or pull plug.

Remove the top grill by taking off 3 screws which hold it in place.

Next, remove the single screw located above door near center of oven that secures light housing. Replace burned-out bulb with 30-watt incandescent bulb (WB2X4235) available from your GE supplier. Secure light housing with screw.

17