PROBLEM
“PROBE” APPEARS ON DISPLAY
“RESET” APPEARS ON DISPLAY
POSSIBLE CAUSE AND REMEDY
*probe has been forgotten or not seated properly in oven wall when using Temp Cook/Hold or Auto Roast finctions.
●Power has been disrupted. Touch CLEAR/OFF and reset clock.
Ml these th~ m normal with your mkrowave oven:
Q Steam or vapor escaping from around the door.
●Light reflection around door or outer case.
●Dull, thumping sound while oven is operating.
● - mn @t ti change in blower sound may occur while
o~rating at power levels other than high.
c Some
If you need more help.. call, toll free:
The GE Answer Center@ 800.626.2000
consumer information service
21