GE JVM260AV, JVM260BV Grounding Instructions, THE EXHAUST FEATURE7, Reusable Grease Filters

Models: 164D2966P143 49-8623 JVM260WV JVM260 JVM260AV JVM260BV

1 36
Download 36 pages 24.61 Kb
Page 31
Image 31
GROUNDING INSTRUCTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of elect~c shock by providing an escape wire for the electric current. This appliance is equipped with a power cord having a grounding

wire with a grounding plug. The

plug must be plugged into an that is properly installed and grounded. (Fig. 1)

wARNING–Imm-o~er

IL

use of the grounding plug can result in a risk of electric shock.

P R E F E R R E D

M E T H O D

I

Ensure proper ground

Fia. 1 exists before use

outlet THE EXHAUST FEATURE7I “

Consult a qualified electrician or service technician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

Where a standard 2-prong wall receptacle is encountered, it is your personal responsibility and obligation to have it replaced with

aproperly grounded 3-prong wall receptacle.

Do not under any circumstance cut or remove the third (ground) prong from the power cord.

Do not use an adapter plug with this appliance.

Do not use an extension cord with this appliance.

THE EXHAUST FEATURE7

The exhaust hood feature on your microwave oven is equipped with two metal filters which collect grease. When the fan is operated, air is drawn up through the filters and is then discharged through the provided venting to the outside.

LIGHT

Reusable Grease Filters

The grease filters should be cleaned at least once a month. Never operate the microwave without the filters in place. In situations where

flaming might occur on surfaces below hood, filters will stop the entryof flames into the unit.

To Remove Grease Filter

To remove grease filter,

grasp the “finger hold” on the filter and slide to the rear. Then pull filter downward and to the front. The filter will drop out.

To Clean and Replace Grease Filter

To clean grease filter, soak it and then agitate filter in solution of hot water and detergent. Don’t use ammonia or ammonia products because they will darken the metal. Light brushing can be used to remove embedded dirt.

Rinse, shake and remove moisture before replacing.

To replace grease filter, slide the filter in the frame slot on the back of the opening.

Pull filter upward and to the front to lock into place.

(continued next page)

31

Page 31
Image 31
GE JVM260AV, JVM260BV Grounding Instructions, THE EXHAUST FEATURE7, Reusable Grease Filters, To Remove Grease Filter