GE JVM3660BD, JVM3660SD Replacing the light bulbs, Safety Instructions, Operating Instructions

To replace the bulb(s), first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

Replacing the light bulbs. www.GEAppliances.com

Cooktop Light/Night Light

Replace the burned-out bulb with a 120 volt, 20-watt halogen bulb (WB36X10213), available from your GE supplier.

Remove screw

1

2 Remove the screw at the right edge of the light cover and push on the left edge of the cover to open.

3 Be sure the bulb(s) to be replaced are cool before removing. After breaking the adhesive seal, remove the bulb by pulling straight out. Replace with the same size and type bulb.

4 Raise the light shield and replace the screw. Connect electrical power to the oven.

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

35