Helpful Information
Light Bulb Replacement
1To replace the bulb(s), first
disconnect the power at
the main fuse or circuit
breaker panel or pull
the plug.
2Remove the screw at the
left of the light cover and
lower the cover.
3Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal, remove
the bulb by gently turning.
Replace with the same size
and type bulb.
4Replace the screw.
Connect electrical power
to the oven.
Replace the burned-out
bulb with a 120 volt,
40-watt incandescent
bulb (WB36X10003),
available from your
GE supplier.

Cooktop Light/

Night Light

1To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
2To remove the top grille,
open the door and
remove the 3 screws on
top of the oven that hold
the grille into place. Slide
the grille to the left to
remove it.
3Lift the metal tab on the
light cover located above
the handle.
4After breaking the
adhesive seal, remove the
bulb by gently turning.
Replace with the same
size and type bulb.
5Replace the light cover.
6Replace the grille and
screws. Connect electrical
power to the oven.
Replace the burned-out
bulb with a 120 volt,
40-watt incandescent
bulb (WB36X10003),
available from your
GE supplier.

Oven Light

Remove screw
Screws
38
Light cover
Filter housing