Helpful Information
The Exhaust Feature
40
If the model is not vented to
the outside, the air will be
recirculated through a
disposable charcoal filter
that helps remove smoke
and odors.
The charcoal filter should
be replaced when it is
noticeably dirty or
discolored (usually after
6–12 months, depending on
hood usage). See “Optional
Kits,” page 9,
for more information.
The charcoal filter
cannot be cleaned. It
must be replaced.
Order Part No.
WB06X10823 from your
GE supplier.

Charcoal Filter

(on some models)
To remove the charcoal
filter, disconnect power at
the main fuse or circuit
breaker panel or pull
the plug.
Remove the grille by
opening the door and
removing the 3 screws on
top of the oven that hold
the grille in place. Slide the
grille to the left to remove it.
Push the filter at the bottom
until it comes free of the
locking tabs. Slide the filter
down and out.

To Remove

Charcoal Filter
Remove 3 grille screws
to remove the grille.
To install a new filter,
remove plastic and other
outer wrapping from the
new filter.
Insert the filter into the
left side of the front top
opening of the oven as
shown. It will rest at an angle
on 2 side support tabs and in
front of the right rear tab.
Replace the grille and 3
screws.

To Install

Charcoal Filter
Filter housing