To Stop Dispensing
Release pressure from cradle and withdraw slowly to catch last bits of ice or drops of water.
To Remove Ice Cube | If Ice Is Not Used |
Storage Bin... | Frequently... |
| Old ice cubes will become cloudy |
| and taste stale. Empty ice storage |
| bin periodically and wash it in |
| lukewarm water. Be sure to allow |
| storage bin to cool before replacing |
| |
| to the metal auger. |
“J’-
Some slight dripping may occur following dispensing of crushed ice or chilled water. If excessive, the spill should be wiped dry immediately.
Do not pour water in spill shelf because it is not
If Ice Clumps Form in
Storage Bin...
, ‘f”,/, I
II
Lift the left corner to free the bin from the shelf, and pull the bin straight out while supporting it at front and back.
To Replace Ice Cube
Storage Bin
Slide the bin back until the tab on the bin locks into the slot in the shelf.
Move Icemaker Feeler Arm to OFF (up) Position When...
. Home water supply is to be turned off for several hours.
o Ice storage bin is to be removed for a period of time.
. Going away on vacation. at which time you should also turn off the valve in the water supply line to your refrigerator.
If This Is Your First
Icemaker...
You’ll hear occasional sounds that may be unfamiliar. These are normal icemaking sounds and are not cause for concern.
The icemaker ejects cubes in groups of eight. and it is normal for several cubes to be joined together. However, infrequent usage of ice can cause ice clumps to form in the storage bin. resulting in temporary malfunction of the dispenser mechanism.
If this happens:
. Remove storage bin from freezer compartment.
. Break up ice clumps with fingertip pressure and discard remaining clumps.
. Replace bin before remaining cubes melt and fuse together.
Drwe
Mechanism (/’
If bin does not go all the way back. remove it and rotate the drive mechanism 1/4 turn. Then push bin back again until the tab on the bin locks into the slot in the shelf.
! 3
1 | II |
