Installation Preparation
PARTS SUPPLIED:
Two #8 Phillips flat head wood screws, 5/8" long to secure dishwasher to underside of countertop or sides of cabinetry. (Taped to top or side of dishwasher.)
Side and top trim pieces
Trim Panel Accessory Kit (not shown). Model PDW9700 only
Drain Hose and Hose Clamp
2 Wood Screws
Trim Pieces
(some models)
Drain Hose | Hose Clamp |
|
MATERIALS YOU WILL NEED :
Ferrule, compression nut and 90° Elbow (3/8"NPT external thread on one end, opposite end sized to fit water supply)
Thread seal tape
UL Listed wire nuts (3)
Materials For New Installations Only:
| Hand | Wire Nuts (3) |
90° Elbow, | Thread | |
Ferrule and | Valve | Seal Tape |
Compression Nut |
|
|
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable |
| Electrical Cable | Hot Water line | |
Electrical cable or power cord, if applicable |
| (or Power Cord, if applicable) | ||
|
|
| ||
Screw type hose clamps |
|
|
| |
Strain relief for electrical connection. |
|
|
| |
Hand | Waste Tee |
| Coupler | |
Water line 3/8" min. copper | Screw Type | |||
| Strain Relief | |||
Coupler for extending drain line, if applicable | Air Gap | Hose Clamps | ||
|
TOOLS YOU WILL NEED:
Phillips head screwdriver | Phillips | |
Head | ||
5/16" and 1/4" nutdriver | ||
Screwdriver | ||
|
6" Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when flushing the line
| Level |
1/4" |
|
and 5/16" |
|
Nutdriver |
|
| Carpenters |
6" Adjustable | Square |
Wrench |
|
| Tubing Cutter |
15/16" socket (optional for skid removal)
Gloves
For New Installations Only: Tubing cutter
Flashlight
Measuring Tape |
Safety Glasses |
Drill and appropriate bits |
|
|
Hole saw set | Gloves | Bucket |
Drill and Bits
Hole Saw Set
2