GE PT920SM installation instructions GE Profile 30 Built-In Single Convection Wall Oven

PT920SM

GE Profile™ 30" Built-In Single Convection Wall Oven

Dimensions and Installation Information (in inches)

KW Rating

240V	4.5
208V	3.4
Breaker Size
240V	20 Amps
208V	20 Amps

Most 30” Wall Cabinets can be used with this unit.

Note: These ovens are not approved for stackable or side-by-side installations. Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

Suitable bracing to support runners

C

L

21-5/8"

over centerline of cabinet

(must support 275 lbs.)

Cutout width 28-1/2'' MIN. 28-5/8'' MAX.

2 x 4 or equivalent runners

29-3/4

A

Conduit

C(72" long)

5

23-1/2'' MIN. Cutout depth

B

27-1/4'' MIN.

27-5/16'' MAX. Cutout height

Recommended cutout location 32-1/2"

Junction box location

22'' MIN.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

Side-by-side installations require at least 2" between cutouts.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

21
Allow minimum of 21'' for clearance	30
to adjacent corners, drawers, walls, or etc.

from floor

Listed by Underwriters Laboratories

Specification Created 1/07 220239