GE PT920SM installation instructions Optional Undercounter Dimensions and Installation Information

PT920SM

GE Profile™ 30" Built-In Single Convection Wall Oven

Optional Undercounter Dimensions and Installation Information

Note: 36” ribbon cooktops are approved for use over GE 30” single wall ovens only. 30” ribbon cooktops are approved for use over GE 30” and

With 36" Gas Cooktop	With 30" CleanDesign or Sealed Burner Gas Cooktop
3-1/4	Side View	1-1/2" Typical countertop

GE 27” single wall ovens. Refer to cooktop and wall oven installation information packed with products for current dimensional data.

Note: CleanDesign or Sealed Burner Gas

This installation is to achieve minimum gap between bottom of countertop and control panel. For this installation, the bottom trim will not be flush with a typical 4” toe kick

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

3-1/2" MIN. Free space

30" built-in oven

4" To 4-1/2"

	2 (two) 90°elbows &
	sufficient pipe to
	connect in adjacent
	cabinet
Conduit	Junction box
(72" long)
	for oven
1/2" Black	Junction box in
iron pipe	adjacent cabinet
Pressure	for cooktop
	hook-up
regulator	22
Union

Shut-off	Power cord
	for cooktop
valve

3/4" Support

Right cabinet side

			Free space
	1
			-1/2" MIN.
		16
30-7/
Add suitable				27-1/4" MIN.
filler to match				27-5/16" MAX.
adjacent cabinets
when needed				Cutout height
to maintain toe
kick alignment
5-9/16"
Reference dim.
for MAX. support
height with typical
36" countertop
height

Power cord

Junction box(s) for

oven & radiant

cooktop 22" from

floor

36" Typical

Countertop height

22

Reference

5-9/16

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

Side View

		25
			23-1/2" MIN.
			Cutout depth
Gas or electric cooktops may be installed	Top and/or side
over this oven. See cooktop installation	fillers may be		28-1/2'' MIN.
instructions for cutout size. See label on	necessary if unit
top of oven for approved cooktop models.	is positioned		28-5/8'' MAX.

Junction box		Gas
location		connection
240/208V
	5

120Volt

Outlet

Gas (including the pressure regulator) and electrical connections for gas cooktop must be located in an adjacent accessible location. For a 30" gas cooktop, the connections are more conveniently made to the right.

1-1/2" Countertop

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at

between		27-1/4'' MIN.
existing cabinets
		27-5/16'' MAX.
		Cutout height
3/4'' Support
platform required
	Match toe kick height
	front and two sides

Allow 11/16'' overlap over side edges of cutout

22'' MIN. above		3		.
support platform			6'' MIN
24

ge.com or call GE Answer Center® service, 800.626.2000.

4'' To 4-1/2 '' Toe kick allowable

Listed by

Underwriters

Laboratories

Specification Created 1/07 220239