SafetyInstructions
Preparing to install the refrigerator.
Read these instructions completely and carefully.
Before plugging in the refrigerator, let it stand for about two hours. This reduces the possibility of problems with the cooling system due to moving and handling.
Refrigerator Location
Instructions
Do not install the refrigerator where the temperature will go below 50°F (10°C) because it will not run often enough to maintain proper temperatures.
Install it on a floor strong enough to support it fully loaded.
Do not install it closer than 5″ (13 cm) next to a range.
Do not install it in a recessed area.
Do not build in the refrigerator.
Clearances
Allow the following clearances for ease of installation and proper air circulation.
Sides | 1/2″ (13 mm) |
Top | 2″ (51 mm) |
Back | 2″ (51 mm) from the rear cabinet surface |
| to the wall |
TroubleshootingTips Installation
CustomerService
Leveling Legs (on some models)
Adjustable legs at the front corners of the refrigerator should be set so the refrigerator is firmly positioned on the floor and the front is raised just enough that the door closes easily when opened about halfway.
To adjust the leveling legs, turn the legs clockwise to raise the refrigerator, counterclockwise to lower it.
Turn clockwise to raise, counterclockwise to lower.
8
