GE UK-KIT-3S Installing The Icemaker, 1REMOVE THE ICE SERVICE RACK, Installation Instructions

Installation Instructions

INSTALLING THE ICEMAKER

1REMOVE THE ICE SERVICE RACK

An ice service rack is mounted on knobs secured with screws in the left side of the freezer wall.

3INSTALL WATER FILL TUBE THROUGH THE BACK OF THE REFRIGERATOR

•Remove ice trays and storage bin.

•Carefully slide the ice rack up and off the mounting knobs.

Ice

Service

Rack

•Remove and discard the screws and knobs from the wall.

2REMOVE ELECTRICAL PLUG AND WATER CONNECTION COVER

Electrical plug and water connection cover

•Remove the cover for the water tube inlet hole on the back of the refrigerator near the bottom. Use a flat-blade screwdriver covered with masking tape to protect against scratching the refrigerator.

•After removing the cover, use the screwdriver to pierce the interior sealing tape that covers the hole for the water

fill tube inlet. Clear a path for the water

fill tube.

Masking tape

Cover for the water tube inlet hole on the back of the refrigerator

	Sealing tape
	(remove)
		Water tube
		inlet hole
Back
		Back of the
wall
inside		refrigerator
freezer	Electrical connection

A

•Remove screw (A) that holds the cover in place. Discard the screw and cover.

Cover mounting

slot

Double prong plug

•Push in a double prong plug to seal the cover mounting slot.

•To prevent the styrofoam insulation beads from entering the water fill tube during installation, temporarily cover the end of the tube with masking tape. Push the water fill tube through the hole.

•	From the inside		Water fill tube
	of the freezer, pull the	Back
	water fill tube through	wall
		inside
	the hole in the back
		freezer
	wall. Be sure to	tubeWater
	remove the masking
	tape from the end of	inlet
	the water fill tube to	hole	Back of the
	allow water to flow		refrigerator
	into the icemaker.	Masking	Electrical
•	From the outside, push tape		connection
	gently on the water fill	Sealed	water
	tube while twisting it	fill tube
	slightly, until the flange
	is firmly sealed inside	Flange
	the hole on the back of
	the refrigerator. Make
	sure the water fill tube	Water fill
	is completely sealed.	tube

8