GE DPGT650, UPGT650 Remove Filler Plugs, Remove Handle, Remove Door, Reverse Door Catch

Installation Instructions

REVERSING THE DOOR SWING (if desired)

1REMOVE FILLER PLUGS

Open the door and remove the filler plugs opposite the hinges.

3REMOVE HANDLE

Remove the screws holding the handle and two spacers.

Rear of Door

2REMOVE DOOR

•With the door completely open, remove the BOTTOM screw from each hinge on the dryer face.

•Insert the screws about halfway into the TOP holes, for each hinge, on the opposite side (where you removed the filler plugs). Apply firm pressure to get the screw started in new holes.

•Loosen the TOP screw from each hinge on the dryer face halfway. With one hand holding the top of the door and the other hand holding the bottom, remove the door from the dryer by lifting it UP and OUT.

4REVERSE DOOR CATCH

Remove the door catch and filler plate. Install them on opposite sides of the door.

Filler

Plate

Catch

31