Installation Instructions

CONNECTING A GAS DRYER (cont.)

TEST FOR LEAKS

WARNING – Never use an open flame to test for gas leaks.

Check all connections for leaks with soapy solution or equivalent.

Apply a soap solution. The leak test solution must not contain ammonia, which could cause damage to the brass fittings.

If leaks are found, close the valve, retighten the joint and repeat the soap test .

Open Gas

Valve

ELECTRICAL CONNECTION INFORMATION FOR GAS DRYERS

WARNING – To reduce the risk of fire, electrical shock and personal injury:

•Do not use an extension cord or an adapter plug with this appliance.

•The dryer must be electrically grounded in accordance with local codes and ordinances or, in the absence of local codes, in accordance with the NATIONAL ELECTRICAL CODE, ANSI/NFPA NO. 70.

ELECTRICAL REQUIREMENTS

FOR GAS DRYERS

This appliance must be supplied with 120V, 60Hz, and connected to a properly grounded branch circuit, protected by a 15- or 20-amp circuit breaker or time-delay fuse.

If electrical supply provided does not meet the above specifications, it is recommended that a licensed electrician install an approved outlet.

WARNING – This dryer is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding terminal from this plug.

Ensure proper ground exists before use.

If local codes permit, an external ground wire (not provided), which meets local codes, may be added by attaching to the green ground screw on the rear of the dryer, and to an alternate established ground.

Ground Screw

20

Page 19 Page 21
Page 20
Image 20
GE UPGT650, DPGT650 operating instructions Test for Leaks, Electrical Requirements For GAS Dryers
Page 19 Page 21

DPGT650, UPGT650 specifications

The GE UPGT650 and DPGT650 are advanced gas turbine models developed by General Electric, known for their cutting-edge technology and high efficiency. Designed primarily for power generation and industrial applications, these gas turbines represent the latest in innovation and performance in the energy sector.

At the heart of the UPGT650 is its high-efficiency design that optimizes fuel consumption while reducing emissions. This gas turbine operates at a high pressure ratio, which significantly enhances its overall efficiency, making it a preferred choice for operators seeking to minimize operational costs while maximizing output. The UPGT650 boasts a fuel flexibility feature, enabling it to run on various fuels, including natural gas and liquid fuels, catering to different operational needs and geographical conditions.

The DPGT650 variant, specifically developed for applications requiring high reliability and performance in distributed power generation, offers similar efficiency benefits while providing enhanced operational flexibility. Its modular design allows for easy maintenance and upgrades, which is crucial for facilities needing to adapt to changing energy demands and regulatory environments.

Both turbine models incorporate advanced technologies such as advanced cooling systems to maintain optimal operating temperatures and enhance durability. The utilization of advanced materials in the turbine blades contributes to their ability to withstand high thermal and mechanical stress, further improving performance longevity. Additionally, the turbines are equipped with sophisticated control systems that enable operators to achieve precise load management and efficient power dispatch.

A critical characteristic of the UPGT650 and DPGT650 is their environmental performance. These turbines are engineered to meet stringent emissions standards, effectively reducing CO2 and NOx emissions. This makes them suitable for regions with strict environmental regulations, appealing to companies focused on sustainability and environmental responsibility.

In summary, the GE UPGT650 and DPGT650 gas turbines stand out in the energy landscape for their efficiency, reliability, and environmental performance. With features like fuel flexibility, advanced cooling technologies, and modular design, they are poised to meet the evolving demands of the power generation industry, driving the transition towards cleaner and more efficient energy systems.
Top Page Image Contents