GE WSLS1500, WSLP1500 manual Turn Water Faucets OFF, Disconnect the Drain and Water Supply Hoses

Installation Instructions

WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1500— TWO-FAUCET CONNECTIONS

If you have two separate water connections, your washer can be connected to both the hot and cold water faucets. This kit can be purchased from your dealer or from Parts and Accessories. In the United States, call 800.626.2002. In Canada, consult the yellow pages for your local Camco number.

TO CONNECT THE WASHER:

1CONNECT TO WATER LINE

Connect HOT and COLD water inlet hoses to the HOT and COLD faucets.

2CONNECT DRAIN HOSE

Secure the drain hose to the sink or stand pipe.

Cable

Tie

Cable

Tie

Sink Stand Pipe

3PLUG THE POWER CORD INTO A 3-PRONG GROUNDED OUTLET

Insure proper ground exists before use

4INSTALLATION CHECKLIST

Before starting the washer, check to make sure:

❏Main power is turned on.

❏The washer is plugged in.

❏The water faucets are turned on.

❏The unit is level.

❏The drain hose is properly tied up.

❏There are no leaks at the faucet, drain line or washer.

TO DISCONNECT THE WASHER:

1 TURN WATER FAUCETS OFF

2UNPLUG POWER CORD AND RETURN IT TO THE STORAGE AREA

3

DISCONNECT THE DRAIN AND WATER SUPPLY HOSES

Hang them on the storage rack.

16