GE WSLP1500, WSLS1500 manual Connect to Water Line, Connect to Valve Inlet, Tighten Connector

Installation Instructions

WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1500— ONE-FAUCET CONNECTIONS

Use the hose connector provided with the washer for a one-faucet connection.

TO CONNECT THE WASHER:

1REMOVE THE UNI-COUPLE®HOSE FROM INSIDE THE WASHER BASKET

Drain Connection

Faucet Connector

COLD Water

Supply Connector

Water Filter

Uni-Coupler Hose

2CONNECT TO WATER LINE

Attach the hose connector to the faucet adapter by pulling down on the locking collar while lifting up on the connector until it snaps into place. Make sure the water filter provided is in place.

Locking Collar

3CONNECT TO VALVE INLET

Attach the COLD water supply connector to the COLD water valve inlet (color BLUE). Make sure the washer is inside the connector before tightening.

4TIGHTEN CONNECTOR

Tighten the connector, ensuring the threads are aligned properly for tightest fit . Inspect for kinks or binding of the hose.

NOTE: Do not remove the plastic cap from the HOT water inlet for uni-coupler connections as leakage may occur.

Plastic Cap

5CONNECT DRAIN HOSE

Attach the drain hose to the rear of the washer. Install the clamp on the drain hose and tighten to prevent leakage of water.

Hose Connector

13