Cutlery Tray
The cutlery tray holds up to 4 large knifes such as
a carver, chef’s knives, bread knife, etc., that are
too tall to fit in the silverware basket.
Hook the tray onto the rear of the upper rack.
Lay the knives between the guides (as shown).
Bowl Tines
The special large-bowl tines in the lower rack add
flexibility to your loading pattern. They are useful
for serving bowls or other large bowls.
To use the bowl tines, fold down the 2 rows of flex
tines in front of the bowl tines and load bowls just
as you would in the upper rack.
You can remove the upper rack to allow space for
large items in the lower rack.
To remove the upper rack, push thumb tab out
and remove the front end caps on each side of
the rail.
Pull the rack straight out and off the rails.
Replace the end caps, then push the rails all the
way back into the dishwasher. Slide the shower
nozzle attachment over the spout.
Then fill the lower rack and begin your cycle.
NOTE: Nozzle must be in place with upper rack
removed. If not installed properly, poor wash
performance and noise will result.
NOTE: Don’t forget to remove the shower nozzle
attachment before you replace the upper rack.
13
Lower Rack