Controls and Features
Beverage Center
Temperature control
The operating temperatures of the beverage center range from 40°F to 65°F.
Do not install the beverage center where the temperature will go below 55°F or above 90°F.
The temperature display shows the actual temperature of the beverage center. The actual temperature may vary slightly from the set temperature based on factors such as door openings, amount of beverages and room temperature. After making adjustments, allow 12 to 24 hours for the beverage center to reach the temperature you have set and before making any further adjustments. The factory setting is 45°F.
To change the temperature settings,
press the + and – pads until you reach the desired set temperature. After several seconds, the display will return to the actual temperature. The actual temperature will be displayed while the unit moves toward the set temperature.
Allow 12 to 24 hours for the beverage center to reach the temperature you have set and before making any adjustments to the initial setting.
Child control lockout
This child control lockout feature prevents unwanted changes to your temperature settings.
After the desired temperature is set the temperature can be locked. To lock, press both the + and – pads at the same time for five seconds. To unlock, press both + and
–pads for five seconds.
Interior lighting and glass activation
The interior light makes it easy to view your beverage labels and enhances the display of your collection. The privacy glass allows you to view your wine and beverages with a simple press of a button, without opening the door. These two features work jointly to display your beverages.
Normal operation
When the door is opened, the light will come on and the door will become clear.
Special features
The light and glass activation button, located at the top of the handle, will switch the glass from opaque to clear and will, at the same time, turn on the light. The light will stay on and the glass will remain clear for one hour from the last time the button was pressed. To turn the light off and make the glass opaque, press
the button again. The opaque setting conceals the contents from view.
The light will come on only when the door is opened or the button is pressed. If you choose to activate the light and door while the door is open, you may notice that the word ON is displayed.
If you press the light button a second time, while the door is open the word OFF will be displayed.
For best viewing, do not store a bottle on the top shelf directly under the light. Remember to turn off the light when it is no longer needed.
8
