For your safety
Cleaning the outside
Care and Cleaning
Beverage Center
Unplug the beverage center before cleaning. If the unit is in a
The exterior surfaces can be washed with | Do not use scouring pads, powdered |
mild soap and water. Rinse thoroughly | cleaners, bleach or cleaners containing |
with clear water. Never use abrasive | bleach because these products can scratch |
scouring powders. | and damage the finish. |
| Warranty does not cover damage due to |
| improper cleaning methods. |
Glass door
Use a glass cleaner or mild soap and water and a soft cloth to clean the glass door. Do not use any abrasive powders.
Avoid cleaning cold glass with hot water because the extreme temperature difference may cause it to break. Rough handling of tempered glass can cause it to shatter.
Do not place magnets on or near the glass door. Magnets may cause permanent damage to the door.
Door gasket
The vinyl gasket may be cleaned with mild | After cleaning the door gasket, apply a |
soap and water, a baking soda solution or | thin layer of paraffin wax or petroleum |
a mild scouring powder. Rinse well. | jelly to the door gasket at the hinge side. |
| This helps keep the gasket from sticking |
| and bending out of shape. |
Light bulb replacement
In the event of a power failure
Preparing to move
Unplug the beverage center before | To remove the light shield, push in the tab |
replacing the light bulb. If the unit is | on the left side of the shield and lower it. |
in a | Replace with a 15 watt appliance bulb. |
at the circuit breaker. |
|
|
|
If the power fails, open the door as | Do not store or use gasoline or other |
infrequently as possible to maintain | flammable vapors and liquids in the |
the temperature. | vicinity of this or any other appliance. |
Secure all loose items such as shelves and | Be sure the beverage center stays in an |
drawers by taping them securely in place | upright position during moving. |
to prevent damage. |
|
11
