Installation dimensions

Installation dimensions

 

 

 

 

 

Built-In Dimensions

 

 

 

 

 

 

 

 

 

 

 

 

 

Wine Reser ve

 

 

 

 

 

The wine reserve can be a free-standing

When building in the wine reserve, be sure

model or can be built in using the cut-out

to allow for a full door swing so you have

dimensions below.

 

 

 

full access to the pull-out drawers.

 

 

 

 

 

See the Installation Instructions (Pub. No.

 

 

 

 

 

49-60210) for complete directions.

 

233/4

 

233/4

 

 

 

(603 mm)

 

(603 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

341/2

(876 mm)

Product dimensions:

NOTE:

Cut-out dimensions:

Height: 341/2″ (876 mm)

Handle and

Height: 341/2–35″ (876–889 mm)

Width:

233/4″ (603 mm)

handle standoff

Width: 233/4″ (603 mm) minimum

Depth:

233/4″ (603 mm)

depth is 13/4

Depth: 24″ (610 mm)

Product clearances

The wine reserve is factory set for a 110° door swing.

When installed in a corner:

Allow 4″ minimum clearance on the hinge side for the 90° door swing and to allow racks to slide out.

Allow 10″ minimum clearance on the hinge side for a full 110° door swing.

The door swing is reversible on all models. If desired, change the door swing before installation.

10" Minimum

to Wall

110°

90° Door Swing

21-5/8"

23-5/8"

90°

4" Minimum

to Wall

Choose the location:

These products may be closed in on the top and three sides as long as the front is unobstructed for air circulation and proper access to the door.

Do not install these products where the temperature will go below 55°F (13°C) or above 90°F (32°C).

Do not install where it will be subject to direct sunlight, heat or moisture.

Black or Stainless Steel Toekick Options

These products are shipped with a black toekick installed. An optional stainless steel toekick is also supplied with each product. For shipping purposes, the stainless steel toekick is secured to the back of the unit.

13

Page 13
Image 13
GE ZDWR240 owner manual Installation dimensions, Built-In Dimensions, Product clearances