36
Using the Self-Cleaning Oven
Wall Oven
How todelay thestart ofcleaning
1Press the SELF CLEAN STD/LOW pad once
for a 4-hour clean time or twice for a 3-hour
clean time.
A 3-hour self-clean time is recommended for
use when cleaning small, contained spills. A
self-clean time of 4 hours or longer is
recommended for a dirtier oven.
2 If a time other than 4 hours or 3 hours is
needed, use the number pads and enter the
desired clean time.
You can change the clean time to any time
between 3 hours and 5 hours, depending on
how dirty your oven is.
3Press the DELAY STARTpad.
4Using the number pads, enter the time of
day you want the clean cycle to start.
5Press the START pad.
The door locks automatically. The display will
show the start time. It will not be possible to
open the oven door until the temperature
drops below the lock temperature and the
LOCKED light goes off.
When the LOCKED light goes off, you will be
able to open the door.
NOTE: On double oven models, you can set a delay
clean in both ovens at the same time. The second oven
set will automatically delay the start of cleaning until
the end of the first oven’s clean cycle.
To recall the start time of the second oven set, press
the DELAY START pad on the controls for the
second oven.
After aclean cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the
oven cools.
If white spots remain, remove them with
a soap-filled steel wool pad and rinse
thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
• You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
• While the oven is self-cleaning, you can press
the CLOCK pad to display the time of day.
To return to the clean countdown, press the
SELF CLEAN STD/LOW pad.
• If the racks become hard to slide, wipe the
rack supports with cooking oil.