For your safety
Gasket
Care and Cleaning
Bar Refrigerator with Icemaker
Turn the bar refrigerator with icemaker OFF or unplug the unit before cleaning.
Turn the bar refrigerator with icemaker OFF by pressing the button on the control panel a minimum of 3 seconds until the light turns off.
The main door and icemaker | After cleaning the gaskets, apply a thin |
compartment gaskets may be cleaned | layer of paraffin wax or petroleum jelly to |
with mild soap and water, a baking soda | the gaskets. This helps keep the gaskets |
solution or a mild scouring powder. Rinse | from sticking and bending out of shape. |
and dry well after cleaning. |
|
Light bulb replacement
In the event of a power failure
Turn the bar refrigerator with icemaker | To remove the light shield, pull the tab in |
OFF before replacing the light bulb. | the bottom center of the shield. Replace |
| with a 15 watt appliance bulb. |
If the power fails, open the door as | Do not store or use gasoline or other |
infrequently as possible to maintain | flammable vapors and liquids in the |
the temperature. | vicinity of this or any other appliance. |
Preparing for vacation
For long vacations or absences, remove food and turn the bar refrigerator with icemaker OFF. Clean the interior (see Cleaning the Inside section)
For shorter vacations, remove perishable foods and leave controls at regular settings. However, if the room temperature is expected to drop below 60°F (16°C), follow the same instructions as for
long vacations.
Set the icemaker power switch to the O (off) position and be sure to shut off the water supply to the refrigerator.
Preparing to move
Secure all loose items such as shelves and | Be sure the bar refrigerator with icemaker |
drawers by taping them securely in place | stays in an upright position during moving. |
to prevent damage. |
|
11
