ZISW/B360DR – GE Monogram 36"
1/4" Framed Panel Dimensions
If you choose to install framed panels, they must be cut to the dimensions
shown. The panels will slide into the Door frame on the door and grille.
If the custom panel is less than 1/4" thick, and it fits loosely in the door frame, it can be backed up with a piece of filler material or foam tape to improve the fit.
Important Note:
Maximum total panel weight:
•Freezer food door panel – 75 lbs.
•Freezer door panel – 52 lbs.
•Grille panel – 18 lbs.
Grille Panel |
|
|
|
| |||
9" | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dispenser
Cutout
|
|
|
|
|
| ||||||
|
|
|
|
| |||||||
|
| ||||||||||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
Freezer |
|
| Fresh |
|
| ||||||
| Panel |
|
| Food |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dispenser Cutout
5/16" Trim Reveal
1/4" Panel
Dispenser Models
These refrigerators are supplied with two dispenser trims, one for framed panels and one for overlay panels.
1/4" Framed Panel
The framed panel must be 1/4" nominal thickness to fit the dispenser trim.
•The dispenser trim fits over the custom panel and snaps into the freezer door.
•If the panel is less than 0.250" thick, a noticeable gap may be created around the dispenser trim. Foam tape may be applied on the door to improve the fit.
•If the panel is more than 0.250" thick, the dispenser trim cannot be secured to the door.
1/4" | FREEZER DOOR | 0.250" | |
Framed |
| ||
| Thick | ||
Panel |
| ||
|
|
| |
|
|
|
|
Ice / Water Dispenser
1/4" Dispenser Trim
3/4" Overlay Panels
The overlay dispenser trim is designed to fit a total panel thickness of 1.100".
•If the panel is less than 1.100" thick, a noticeable gap may be created around the dispenser trim.
•If the panel is more than 1.100" thick, the dispenser trim cannot be secured to the door.
•The overlay panel must be constructed according to the specifications shown to achieve the correct total thickness.
•Alternative panel construction methods such as securing a
3/4" panel to a 1/4" backer panel cannot be used. Another method, routing a
•When a raised panel design is to be used, a custom middle rail is required.
| 1/4" Backer Panel | FREEZER DOOR | 1.100" | |
| .10" Spacer |
|
| Total |
|
|
| Thickness | |
| Panel |
|
| |
|
|
|
| |
|
|
|
| |
|
|
| Ice / Water Dispenser |
|
| 3/4" Overlay |
|
|
|
| Panel | 3/4" Overlay Dispenser Trim |
| |
|
|
| ||
|
|
|
|
|
|
| As an Energy Star® | For answers to your Monogram,® GE Profile™ or |
| Listed by |
| partner, GE has determined | GE® appliance questions, visit our website at |
| Underwriters |
| that this product meets the | GEAppliances.com or call |
Specification Revised 3/08 | Laboratories |
| Energy Star guidelines | GE Answer Center® service, 800.626.2000. |
|
| for energy efficiency. |
110108