ZISW/B360DR – GE Monogram 36" Built-In Side-by-Side
|
| Refrigerator with Dispenser and |
|
| Water Filter |
Advance Planning for | ||
Use this page to determine door swing | Frameless Cabinets: The case trim overlaps | |
interaction with adjacent cabinets | cabinets at the top and sides. Therefore, | |
or countertops. | frameless cabinets may require filler strips | |
|
| to prevent interference with cabinet door swing. |
|
| The opening must allow for filler strips. |
Refrigerator
Rear of
Refrigerator
Top View
130° Door Swing (Factory setting) Scale 1:1
IMPORTANT NOTE –
FOR DISPENSER MODELS
Dispenser models are supplied with
two dispenser trims, one to fit framed panels and one for overlay panels. Dispenser trim fit to the custom panel depends on correct panel thickness. Framed panels
must be 1/4" nominal. Overlay panels should be constructed as shown
to accomplish a total 1.100" thickness.
Listed by
Underwriters
Laboratories
Case | 1" | 2" | 3" | ||
3/4" | |||||
Trim | |||||
|
| 1/2" | |||
|
| ||||
|
| 1/4" | |||
|
|
|
|
|
1/4"
1/2"
3/4"
1"
1/4" | 1/2" |
|
| 3/4" | |
|
| 1" |
Door | |
| |
| 3/4" Overlay |
| Panel |
| (Nominal Size) |
As an Energy Star® partner, GE has determined that this product meets the Energy Star guidelines for energy efficiency.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at GEAppliances.com or call
GE Answer Center® service, 800.626.2000.
Specification Revised 3/08
110108