GE ZSC1201NSS/ZSC1202NSS, GE Monogram Built-InAdvantium 120 Oven, Specification Created 11/08

ZSC1201NSS/ZSC1202NSS

GE Monogram® Built-In Advantium® 120 Oven

Dimensions and Installation Information (in inches)

Important: These installation cutouts do not include the accessory drawer.

Single Advantium 120V installation

23-1/2"

30"

25-1/4"

17-1/2"

Construct Base Min. 3/8" Plywood Supported by 2 x 4 or 2 x 2 Runners all Four Sides

•Allow 2-1/8" case trim overlap on the sides and 7/8" overlap on the bottom. Allow 1-1/8" overlap at the top of the oven.

Installation over a Monogram Oven

30"	23-1/2"	Construct Solid
		Bottom Min. 3/8"
		Plywood
		Supported by
	25-1/4"	2 x 4 or 2 x 2
		Runners, all
		Four Sides
17-1/2"		2" Min.
		Per Oven
		Requirement

Additional clearances between the cutouts may be required. See oven installation instructions for details.

Installation over a Monogram

Warming Drawer

30"	23-1/2"	Construct Solid
		Bottom Min. 3/8"
		Plywood
	25-1/4"	Supported by
		2 x 4 or 2 x 2
		Runners all
		Four Sides
17-1/2"		2" Min.
		Per Warming
		Drawer
		Requirement

Additional clearances between the cutouts may be required. Check to be sure the oven supports above the warming drawer do not obstruct the required interior depth and height. See warming drawer installation instructions for details.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Installation over a Monogram Oven and Warming Drawer

30"	23-1/2"	Construct Solid
		Bottom Min. 3/8"
		Plywood
		Supported by
	25-1/4"	2 x 4 or 2 x 2
		Runners all
		Four Sides
17-1/2"		2" Min.

Per Oven

Requirement

2" Min.

Per warming drawer requirement

Additional clearances between the cutouts may be required. See warming drawer and oven installation instructions for details.

Listed by

Underwriters

Laboratories

Specification Created 11/08 130316