Care and Cleaning
Custom Hood Insert
Stainless steel hood surfaces
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.
To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our
National Parts Center | 800.626.2002 |
monogram.com
Light bulbs
To change the light bulbs:
1.Grasp the outer trim ring and twist until reaching the unlock position. Then pull the ring straight out.
2.Grasp the bulb and twist until reaching the unlock position. Then gently pull the bulb straight out.
3.Replace with the same wattage, type and size bulb. Wear gloves. Do not touch bulb with your bare fingers.
These 120 volt, 50 watt halogen bulbs with a GU10 base are available at specialty lighting stores and home building centers.
4.Replace the outer trim ring by inserting the two retaining tabs into the two tab slots, pressing the ring flush with the surface of the hood insert and twisting until reaching the lock position.
7
