GE Monogram 48 Built-In Refrigerators Installation Requirements, Refrigerator location Clearances

Models: 48 Built-In Refrigerators

1 28
Download 28 pages 15.96 Kb
Page 20
Image 20
Refrigerator location

Refrigerator location

Clearances

Installation

Built - In Refrigerators

INSTALLATION REQUIREMENTS

IMPORTANT…Please Read Carefully.

Do not install refrigerator where

Do install it on a floor strong enough to

temperature will be below 60°F (16°C)

support a fully loaded refrigerator.

because it will not run often enough to

 

maintain proper temperatures.

 

 

 

If the refrigerator is to be installed in a

No other clearances at top, sides, or back

corner, allow 2″ between the hinges of the

are required.

refrigerator and the wall to ensure a 90°

 

door opening capability.

 

 

 

Leveling

This model has 4-point leveling. All 4 corners are supported by leveling legs. The front wheels are non-adjustable; they are only used for positioning the unit.

To level the back of the unit, turn hex nut located above the front wheels.

To level the front of the unit, use a 114″ open end wrench and adjust the leveling legs.

Turn hex nut or front leveling leg clockwise to raise the unit, counter-clockwise to lower the unit.

See the Installation Instructions (Pub. No. 49-6473—36), (Pub. No. 49- 6462—42), (Pub. No. 49-6457—48) for complete directions.

Hex nut

Leveling leg

WheelInstallation

20

Page 20
Image 20
GE Monogram 48 Built-In Refrigerators manual Installation Requirements, Refrigerator location Clearances, Leveling